help.csv

# Copyright 2004-2018 H2 Group. Multiple-Licensed under the MPL 2.0,
# and the EPL 1.0 (http://h2database.com/html/license.html).
# Initial Developer: H2 Group
"SECTION","TOPIC","SYNTAX","TEXT","EXAMPLE"
"Commands (DML)","SELECT","
SELECT [ TOP term [ PERCENT ] [ WITH TIES ] ]
[ DISTINCT [ ON ( expression [,...] ) ] | ALL ]
selectExpression [,...]
FROM tableExpression [,...] [ WHERE expression ]
[ GROUP BY expression [,...] ] [ HAVING expression ]
[ { UNION [ ALL ] | MINUS | EXCEPT | INTERSECT } select ]
[ ORDER BY order [,...] ]
[ LIMIT expression [ OFFSET expression ] [ SAMPLE_SIZE rowCountInt ] ]
[ [ OFFSET expression { ROW | ROWS } ]
    [ FETCH { FIRST | NEXT } [ expression [ PERCENT ] ] { ROW | ROWS }
        { ONLY | WITH TIES } ] [ SAMPLE_SIZE rowCountInt ] ]
[ FOR UPDATE ]
","
Selects data from a table or multiple tables.
GROUP BY groups the the result by the given expression(s).
HAVING filter rows after grouping.
ORDER BY sorts the result by the given column(s) or expression(s).
UNION combines the result of this query with the results of another query.

Number of rows in output can be limited either with standard OFFSET / FETCH,
with non-standard LIMIT / OFFSET, or with non-standard TOP clauses.
Different clauses cannot be used together.
FETCH FIRST/NEXT, LIMIT or TOP limits the number of rows returned by the query (no limit if null or smaller than zero).
If PERCENT is specified number of rows is specified as a percent of the total number of rows
and should be an integer value between 0 and 100 inclusive.
WITH TIES can be used only together with ORDER BY and means that all additional rows that have the same sorting position
as the last row will be also returned.
OFFSET specifies how many rows to skip.
Please note that queries with high offset values can be slow.
SAMPLE_SIZE limits the number of rows read for aggregate queries.

Multiple set operators (UNION, INTERSECT, MINUS, EXCEPT) are evaluated
from left to right. For compatibility with other databases and future versions
of H2 please use parentheses.

If FOR UPDATE is specified, the tables are locked for writing. When using
MVCC, only the selected rows are locked as in an UPDATE statement.
In this case, aggregate, GROUP BY, DISTINCT queries or joins
are not allowed in this case.
","
SELECT * FROM TEST;
SELECT * FROM TEST ORDER BY NAME;
SELECT ID, COUNT(*) FROM TEST GROUP BY ID;
SELECT NAME, COUNT(*) FROM TEST GROUP BY NAME HAVING COUNT(*) > 2;
SELECT 'ID' COL, MAX(ID) AS MAX FROM TEST UNION SELECT 'NAME', MAX(NAME) FROM TEST;
SELECT * FROM TEST OFFSET 1000 ROWS FETCH FIRST 1000 ROWS ONLY;
SELECT A, B FROM TEST ORDER BY A FETCH FIRST 10 ROWS WITH TIES;
SELECT * FROM (SELECT ID, COUNT(*) FROM TEST
    GROUP BY ID UNION SELECT NULL, COUNT(*) FROM TEST)
    ORDER BY 1 NULLS LAST;
SELECT DISTINCT C1, C2 FROM TEST;
SELECT DISTINCT ON(C1) C1, C2 FROM TEST ORDER BY C1;
"

"Commands (DML)","INSERT","
INSERT INTO tableName insertColumnsAndSource
","
Inserts a new row / new rows into a table.

When using DIRECT, then the results from the query are directly applied in the target table without any intermediate step.

When using SORTED, b-tree pages are split at the insertion point. This can improve performance and reduce disk usage.
","
INSERT INTO TEST VALUES(1, 'Hello')
"

"Commands (DML)","UPDATE","
UPDATE tableName [ [ AS ] newTableAlias ] SET setClauseList
[ WHERE expression ] [ ORDER BY order [,...] ] [ LIMIT expression ]
","
Updates data in a table.
ORDER BY is supported for MySQL compatibility, but it is ignored.
","
UPDATE TEST SET NAME='Hi' WHERE ID=1;
UPDATE PERSON P SET NAME=(SELECT A.NAME FROM ADDRESS A WHERE A.ID=P.ID);
"

"Commands (DML)","DELETE","
DELETE [ TOP term ] FROM tableName deleteSearchCondition
","
Deletes rows form a table.
If TOP or LIMIT is specified, at most the specified number of rows are deleted (no limit if null or smaller than zero).
","
DELETE FROM TEST WHERE ID=2
"

"Commands (DML)","BACKUP","
BACKUP TO fileNameString
","
Backs up the database files to a .zip file. Objects are not locked, but
the backup is transactionally consistent because the transaction log is also copied.
Admin rights are required to execute this command.
","
BACKUP TO 'backup.zip'
"

"Commands (DML)","CALL","
CALL expression
","
Calculates a simple expression. This statement returns a result set with one row,
except if the called function returns a result set itself.
If the called function returns an array, then each element in this array is returned as a column.
","
CALL 15*25
"

"Commands (DML)","EXPLAIN","
EXPLAIN { [ PLAN FOR ] | ANALYZE }
{ select | insert | update | delete | merge }
","
Shows the execution plan for a statement.
When using EXPLAIN ANALYZE, the statement is actually executed, and the query plan
will include the actual row scan count for each table.
","
EXPLAIN SELECT * FROM TEST WHERE ID=1
"

"Commands (DML)","MERGE","
MERGE INTO tableName [ ( columnName [,...] ) ]
[ KEY ( columnName [,...] ) ]
{ VALUES { ( { DEFAULT | expression } [,...] ) } [,...] | select }
","
Updates existing rows, and insert rows that don't exist. If no key column is
specified, the primary key columns are used to find the row. If more than one
row per new row is affected, an exception is thrown.
","
MERGE INTO TEST KEY(ID) VALUES(2, 'World')
"

"Commands (DML)","MERGE USING","
MERGE INTO targetTableName [ [AS] targetAlias]
USING { ( select ) | sourceTableName }[ [AS] sourceAlias ]
ON expression
[ WHEN MATCHED THEN
    [ UPDATE SET setClauseList ] [ DELETE deleteSearchCondition ] ]
[ WHEN NOT MATCHED THEN INSERT insertColumnsAndSource ]
","
Updates or deletes existing rows, and insert rows that don't exist. The ON clause
specifies the matching column expression and must be specified. If more than one row
is updated per input row, an exception is thrown.
If the source data contains duplicate rows (specifically those columns used in the
row matching ON clause), then an exception is thrown to prevent two updates applying
to the same target row.
WHEN MATCHED THEN or WHEN NOT MATCHED THEN clauses or both of them in any order should be specified.
If WHEN MATCHED THEN is specified it should contain UPDATE or DELETE clauses of both of them.
If statement doesn't need a source table a DUAL table can be substituted.
","
MERGE INTO TARGET_TABLE AS T USING SOURCE_TABLE AS S
    ON T.ID = S.ID
    WHEN MATCHED THEN
        UPDATE SET T.COL1 = S.COL1 WHERE T.COL2<>'FINAL'
        DELETE WHERE T.COL2='FINAL'
    WHEN NOT MATCHED THEN
        INSERT (ID,COL1,COL2) VALUES(S.ID,S.COL1,S.COL2)
MERGE INTO TARGET_TABLE AS T USING (SELECT * FROM SOURCE_TABLE) AS S
    ON T.ID = S.ID
    WHEN MATCHED THEN
        UPDATE SET T.COL1 = S.COL1 WHERE T.COL2<>'FINAL'
        DELETE WHERE T.COL2='FINAL'
    WHEN NOT MATCHED THEN
        INSERT (ID,COL1,COL2) VALUES(S.ID,S.COL1,S.COL2)
MERGE INTO TARGET_TABLE USING DUAL ON ID = 1
    WHEN NOT MATCHED THEN INSERT (ID, NAME) VALUES (1, 'Test')
    WHEN MATCHED THEN UPDATE SET NAME = 'Test'
"

"Commands (DML)","RUNSCRIPT","
RUNSCRIPT FROM fileNameString scriptCompressionEncryption
[ CHARSET charsetString ]
","
Runs a SQL script from a file. The script is a text file containing SQL
statements; each statement must end with ';'. This command can be used to
restore a database from a backup. The password must be in single quotes; it is
case sensitive and can contain spaces.

Instead of a file name, an URL may be used.
To read a stream from the classpath, use the prefix 'classpath:'.
See the Pluggable File System section on the Advanced page.

The compression algorithm must match the one used when creating the script.
Instead of a file, an URL may be used.

Admin rights are required to execute this command.
","
RUNSCRIPT FROM 'backup.sql'
RUNSCRIPT FROM 'classpath:/com/acme/test.sql'
"

"Commands (DML)","SCRIPT","
SCRIPT [ SIMPLE ] [ NODATA ] [ NOPASSWORDS ] [ NOSETTINGS ]
[ DROP ] [ BLOCKSIZE blockSizeInt ]
[ TO fileNameString scriptCompressionEncryption
    [ CHARSET charsetString ] ]
[ TABLE tableName [, ...] ]
[ SCHEMA schemaName [, ...] ]
","
Creates a SQL script from the database.

SIMPLE does not use multi-row insert statements.
NODATA will not emit INSERT statements.
If the DROP option is specified, drop statements are created for tables, views,
and sequences. If the block size is set, CLOB and BLOB values larger than this
size are split into separate blocks.
BLOCKSIZE is used when writing out LOB data, and specifies the point at the
values transition from being inserted as inline values, to be inserted using
out-of-line commands.
NOSETTINGS turns off dumping the database settings (the SET XXX commands)

If no 'TO fileName' clause is specified, the
script is returned as a result set. This command can be used to create a backup
of the database. For long term storage, it is more portable than copying the
database files.

If a 'TO fileName' clause is specified, then the whole
script (including insert statements) is written to this file, and a result set
without the insert statements is returned.

The password must be in single quotes; it is case sensitive and can contain spaces.

This command locks objects while it is running.
Admin rights are required to execute this command.

When using the TABLE or SCHEMA option, only the selected table(s) / schema(s) are included.
","
SCRIPT NODATA
"

"Commands (DML)","SHOW","
SHOW { SCHEMAS | TABLES [ FROM schemaName ] |
    COLUMNS FROM tableName [ FROM schemaName ] }
","
Lists the schemas, tables, or the columns of a table.
","
SHOW TABLES
"

"Commands (DML)","WITH","
WITH [ RECURSIVE ] { name [( columnName [,...] )] AS ( select ) [,...] }
{ select | insert | update | merge | delete | createTable }
","
Can be used to create a recursive or non-recursive query (common table expression).
For recursive queries the first select has to be a UNION.
One or more common table entries can be referred to by name.
Column name declarations are now optional - the column names will be inferred from the named select queries.
The final action in a WITH statement can be a select, insert, update, merge, delete or create table.
","
WITH RECURSIVE cte(n) AS (
        SELECT 1
    UNION ALL
        SELECT n + 1
        FROM cte
        WHERE n < 100
)
SELECT sum(n) FROM cte;

Example 2:
WITH cte1 AS (
        SELECT 1 AS FIRST_COLUMN
), cte2 AS (
        SELECT FIRST_COLUMN+1 AS FIRST_COLUMN FROM cte1
)
SELECT sum(FIRST_COLUMN) FROM cte2;
"

"Commands (DDL)","ALTER INDEX RENAME","
ALTER INDEX [ IF EXISTS ] indexName RENAME TO newIndexName
","
Renames an index.
This command commits an open transaction in this connection.
","
ALTER INDEX IDXNAME RENAME TO IDX_TEST_NAME
"

"Commands (DDL)","ALTER SCHEMA RENAME","
ALTER SCHEMA [ IF EXISTS ] schema RENAME TO newSchemaName
","
Renames a schema.
This command commits an open transaction in this connection.
","
ALTER SCHEMA TEST RENAME TO PRODUCTION
"

"Commands (DDL)","ALTER SEQUENCE","
ALTER SEQUENCE [ IF EXISTS ] sequenceName
[ RESTART WITH long ]
[ INCREMENT BY long ]
[ MINVALUE long | NOMINVALUE | NO MINVALUE ]
[ MAXVALUE long | NOMAXVALUE | NO MAXVALUE ]
[ CYCLE long | NOCYCLE | NO CYCLE ]
[ CACHE long | NOCACHE | NO CACHE ]
","
Changes the parameters of a sequence.
This command does not commit the current transaction; however the new value is used by other
transactions immediately, and rolling back this command has no effect.
","
ALTER SEQUENCE SEQ_ID RESTART WITH 1000
"

"Commands (DDL)","ALTER TABLE ADD","
ALTER TABLE [ IF EXISTS ] tableName ADD [ COLUMN ]
{ [ IF NOT EXISTS ] columnName columnDefinition
    | ( { columnName columnDefinition | constraint } [,...] ) }
[ { { BEFORE | AFTER } columnName } | FIRST ]
","
Adds a new column to a table.
This command commits an open transaction in this connection.
","
ALTER TABLE TEST ADD CREATEDATE TIMESTAMP
"

"Commands (DDL)","ALTER TABLE ADD CONSTRAINT","
ALTER TABLE [ IF EXISTS ] tableName ADD constraint [ CHECK | NOCHECK ]
","
Adds a constraint to a table. If NOCHECK is specified, existing rows are not
checked for consistency (the default is to check consistency for existing rows).
The required indexes are automatically created if they don't exist yet.
It is not possible to disable checking for unique constraints.
This command commits an open transaction in this connection.
","
ALTER TABLE TEST ADD CONSTRAINT NAME_UNIQUE UNIQUE(NAME)
"

"Commands (DDL)","ALTER TABLE RENAME CONSTRAINT","
ALTER TABLE [ IF EXISTS ] tableName RENAME oldConstraintName
TO newConstraintName
","
Renames a constraint.
This command commits an open transaction in this connection.
","
ALTER TABLE TEST RENAME CONSTRAINT FOO TO BAR
"

"Commands (DDL)","ALTER TABLE ALTER COLUMN","
ALTER TABLE [ IF EXISTS ] tableName ALTER COLUMN columnName
{ { columnDefinition }
    | { RENAME TO name }
    | { RESTART WITH long }
    | { SELECTIVITY int }
    | { SET DEFAULT expression }
    | { SET ON UPDATE expression }
    | { SET NULL }
    | { SET NOT NULL }
    | { SET { VISIBLE | INVISIBLE } }
    | { DROP { DEFAULT | ON UPDATE } } }
","
Changes the data type of a column, rename a column,
change the identity value, or change the selectivity.

Changing the data type fails if the data can not be converted.

RESTART changes the next value of an auto increment column.
The column must already be an auto increment column.
For RESTART, the same transactional rules as for ALTER SEQUENCE apply.

SELECTIVITY sets the selectivity (1-100) for a column.
Setting the selectivity to 0 means the default value.
Selectivity is used by the cost based optimizer to calculate the estimated cost of an index.
Selectivity 100 means values are unique, 10 means every distinct value appears 10 times on average.

SET DEFAULT changes the default value of a column.

SET ON UPDATE changes the value that is set on update if value for this column is not specified in update statement.

SET NULL sets a column to allow NULL. The row may not be part of a primary key.
Single column indexes on this column are dropped.

SET NOT NULL sets a column to not allow NULL. Rows may not contains NULL in this column.

SET INVISIBLE makes the column hidden, i.e. it will not appear in SELECT * results.
SET VISIBLE has the reverse effect.

DROP DEFAULT removes the default value of a column.

DROP ON UPDATE removes the value that is set on update of a column.

This command commits an open transaction in this connection.
","
ALTER TABLE TEST ALTER COLUMN NAME CLOB;
ALTER TABLE TEST ALTER COLUMN NAME RENAME TO TEXT;
ALTER TABLE TEST ALTER COLUMN ID RESTART WITH 10000;
ALTER TABLE TEST ALTER COLUMN NAME SELECTIVITY 100;
ALTER TABLE TEST ALTER COLUMN NAME SET DEFAULT '';
ALTER TABLE TEST ALTER COLUMN NAME SET NOT NULL;
ALTER TABLE TEST ALTER COLUMN NAME SET NULL;
ALTER TABLE TEST ALTER COLUMN NAME SET VISIBLE;
ALTER TABLE TEST ALTER COLUMN NAME SET INVISIBLE;
"

"Commands (DDL)","ALTER TABLE DROP COLUMN","
ALTER TABLE [ IF EXISTS ] tableName DROP COLUMN [ IF EXISTS ]
columnName [,...] | ( columnName [,...] )
","
Removes column(s) from a table.
This command commits an open transaction in this connection.
","
ALTER TABLE TEST DROP COLUMN NAME
ALTER TABLE TEST DROP COLUMN NAME1, NAME2
ALTER TABLE TEST DROP COLUMN (NAME1, NAME2)
"

"Commands (DDL)","ALTER TABLE DROP CONSTRAINT","
ALTER TABLE [ IF EXISTS ] tableName DROP
{ CONSTRAINT [ IF EXISTS ] constraintName | PRIMARY KEY }
","
Removes a constraint or a primary key from a table.
This command commits an open transaction in this connection.
","
ALTER TABLE TEST DROP CONSTRAINT UNIQUE_NAME
"

"Commands (DDL)","ALTER TABLE SET","
ALTER TABLE [ IF EXISTS ] tableName SET REFERENTIAL_INTEGRITY
{ FALSE | TRUE } [ CHECK | NOCHECK ]
","
Disables or enables referential integrity checking for a table. This command can
be used inside a transaction. Enabling referential integrity does not check
existing data, except if CHECK is specified. Use SET REFERENTIAL_INTEGRITY to
disable it for all tables; the global flag and the flag for each table are
independent.

This command commits an open transaction in this connection.
","
ALTER TABLE TEST SET REFERENTIAL_INTEGRITY FALSE
"

"Commands (DDL)","ALTER TABLE RENAME","
ALTER TABLE [ IF EXISTS ] tableName RENAME TO newName
","
Renames a table.
This command commits an open transaction in this connection.
","
ALTER TABLE TEST RENAME TO MY_DATA
"

"Commands (DDL)","ALTER USER ADMIN","
ALTER USER userName ADMIN { TRUE | FALSE }
","
Switches the admin flag of a user on or off.

Only unquoted or uppercase user names are allowed.
Admin rights are required to execute this command.
This command commits an open transaction in this connection.
","
ALTER USER TOM ADMIN TRUE
"

"Commands (DDL)","ALTER USER RENAME","
ALTER USER userName RENAME TO newUserName
","
Renames a user.
After renaming a user, the password becomes invalid and needs to be changed as well.

Only unquoted or uppercase user names are allowed.
Admin rights are required to execute this command.
This command commits an open transaction in this connection.
","
ALTER USER TOM RENAME TO THOMAS
"

"Commands (DDL)","ALTER USER SET PASSWORD","
ALTER USER userName SET { PASSWORD string | SALT bytes HASH bytes }
","
Changes the password of a user.
Only unquoted or uppercase user names are allowed.
The password must be enclosed in single quotes. It is case sensitive
and can contain spaces. The salt and hash values are hex strings.

Admin rights are required to execute this command.
This command commits an open transaction in this connection.
","
ALTER USER SA SET PASSWORD 'rioyxlgt'
"

"Commands (DDL)","ALTER VIEW RECOMPILE","
ALTER VIEW [ IF EXISTS ] viewName RECOMPILE
","
Recompiles a view after the underlying tables have been changed or created.
This command is used for views created using CREATE FORCE VIEW.
This command commits an open transaction in this connection.
","
ALTER VIEW ADDRESS_VIEW RECOMPILE
"

"Commands (DDL)","ALTER VIEW RENAME","
ALTER VIEW [ IF EXISTS ] viewName RENAME TO newName
","
Renames a view.
This command commits an open transaction in this connection.
","
ALTER VIEW TEST RENAME TO MY_VIEW
"

"Commands (DDL)","ANALYZE","
ANALYZE [ TABLE tableName ] [ SAMPLE_SIZE rowCountInt ]
","
Updates the selectivity statistics of tables.
If no table name is given, all tables are analyzed.
The selectivity is used by the
cost based optimizer to select the best index for a given query. If no sample
size is set, up to 10000 rows per table are read. The value 0 means all rows are
read. The selectivity can be set manually using ALTER TABLE ALTER COLUMN
SELECTIVITY. Manual values are overwritten by this statement. The selectivity is
available in the INFORMATION_SCHEMA.COLUMNS table.

This command commits an open transaction in this connection.
","
ANALYZE SAMPLE_SIZE 1000
"

"Commands (DDL)","COMMENT","
COMMENT ON
{ { COLUMN [ schemaName. ] tableName.columnName }
    | { { TABLE | VIEW | CONSTANT | CONSTRAINT | ALIAS | INDEX | ROLE
    | SCHEMA | SEQUENCE | TRIGGER | USER | DOMAIN } [ schemaName. ] objectName } }
IS expression
","
Sets the comment of a database object. Use NULL to remove the comment.

Admin rights are required to execute this command.
This command commits an open transaction in this connection.
","
COMMENT ON TABLE TEST IS 'Table used for testing'
"

"Commands (DDL)","CREATE AGGREGATE","
CREATE AGGREGATE [ IF NOT EXISTS ] newAggregateName FOR className
","
Creates a new user-defined aggregate function. The method name must be the full
qualified class name. The class must implement the interface
""org.h2.api.AggregateFunction"".

Admin rights are required to execute this command.
This command commits an open transaction in this connection.
","
CREATE AGGREGATE SIMPLE_MEDIAN FOR ""com.acme.db.Median""
"

"Commands (DDL)","CREATE ALIAS","
CREATE ALIAS [ IF NOT EXISTS ] newFunctionAliasName [ DETERMINISTIC ]
[ NOBUFFER ] { FOR classAndMethodName | AS sourceCodeString }
","
Creates a new function alias. If this is a ResultSet returning function,
by default the return value is cached in a local temporary file.

NOBUFFER - disables caching of ResultSet return value to temporary file.

DETERMINISTIC - Deterministic functions must always return the same value for the same parameters.

The method name must be the full qualified class and method name,
and may optionally include the parameter classes as in
""java.lang.Integer.parseInt(java.lang.String, int)"". The class and the method
must both be public, and the method must be static. The class must be available
in the classpath of the database engine (when using the server mode,
it must be in the classpath of the server).

When defining a function alias with source code, the Sun ""javac"" is compiler
is used if the file ""tools.jar"" is in the classpath. If not, ""javac"" is run as a separate process.
Only the source code is stored in the database; the class is compiled each time
the database is re-opened. Source code is usually passed
as dollar quoted text to avoid escaping problems. If import statements are used,
then the tag @CODE must be added before the method.

If the method throws an SQLException, it is directly re-thrown to the calling application;
all other exceptions are first converted to a SQLException.

If the first parameter of the Java function is a ""java.sql.Connection"", then a
connection to the database is provided. This connection must not be closed.
If the class contains multiple methods with the given name but different
parameter count, all methods are mapped.

Admin rights are required to execute this command.
This command commits an open transaction in this connection.

If you have the Groovy jar in your classpath, it is also possible to write methods using Groovy.
","
CREATE ALIAS MY_SQRT FOR ""java.lang.Math.sqrt"";
CREATE ALIAS GET_SYSTEM_PROPERTY FOR ""java.lang.System.getProperty"";
CALL GET_SYSTEM_PROPERTY('java.class.path');
CALL GET_SYSTEM_PROPERTY('com.acme.test', 'true');
CREATE ALIAS REVERSE AS $$ String reverse(String s) { return new StringBuilder(s).reverse().toString(); } $$;
CALL REVERSE('Test');
CREATE ALIAS tr AS $$@groovy.transform.CompileStatic
    static String tr(String str, String sourceSet, String replacementSet){
        return str.tr(sourceSet, replacementSet);
    }
$$
"

"Commands (DDL)","CREATE CONSTANT","
CREATE CONSTANT [ IF NOT EXISTS ] newConstantName VALUE expression
","
Creates a new constant.
This command commits an open transaction in this connection.
","
CREATE CONSTANT ONE VALUE 1
"

"Commands (DDL)","CREATE DOMAIN","
CREATE DOMAIN [ IF NOT EXISTS ] newDomainName AS dataType
[ DEFAULT expression ] [ [ NOT ] NULL ] [ SELECTIVITY selectivity ]
[ CHECK condition ]
","
Creates a new data type (domain). The check condition must evaluate to true or
to NULL (to prevent NULL, use ""NOT NULL""). In the condition, the term VALUE refers
to the value being tested.

Domains are usable within the whole database. They can not be created in a specific schema.

This command commits an open transaction in this connection.
","
CREATE DOMAIN EMAIL AS VARCHAR(255) CHECK (POSITION('@', VALUE) > 1)
"

"Commands (DDL)","CREATE INDEX","
CREATE
{ [ UNIQUE ] [ HASH | SPATIAL] INDEX [ [ IF NOT EXISTS ] newIndexName ]
    | PRIMARY KEY [ HASH ] }
ON tableName ( indexColumn [,...] )
","
Creates a new index.
This command commits an open transaction in this connection.

Hash indexes are meant for in-memory databases and memory tables (CREATE MEMORY TABLE).
For other tables, or if the index contains multiple columns, the HASH keyword is ignored.
Hash indexes can only test for equality, and do not support range queries (similar to a hash table).
Non-unique keys are supported.
Spatial indexes are supported only on Geometry columns.
","
CREATE INDEX IDXNAME ON TEST(NAME)
"

"Commands (DDL)","CREATE LINKED TABLE","
CREATE [ FORCE ] [ [ GLOBAL | LOCAL ] TEMPORARY ]
LINKED TABLE [ IF NOT EXISTS ]
name ( driverString, urlString, userString, passwordString,
[ originalSchemaString, ] originalTableString ) [ EMIT UPDATES | READONLY ]
","
Creates a table link to an external table. The driver name may be empty if the
driver is already loaded. If the schema name is not set, only one table with
that name may exist in the target database.

FORCE - Create the LINKED TABLE even if the remote database/table does not exist.

EMIT UPDATES - Usually, for update statements, the old rows are deleted first and then the new
rows are inserted. It is possible to emit update statements (except on
rollback), however in this case multi-row unique key updates may not always
work. Linked tables to the same database share one connection.

READONLY - is set, the remote table may not be updated. This is enforced by H2.

If the connection to the source database is lost, the connection is re-opened
(this is a workaround for MySQL that disconnects after 8 hours of inactivity by default).

If a query is used instead of the original table name, the table is read only.
Queries must be enclosed in parenthesis: ""(SELECT * FROM ORDERS)"".

To use JNDI to get the connection, the driver class must be a
javax.naming.Context (for example ""javax.naming.InitialContext""), and the URL must
be the resource name (for example ""java:comp/env/jdbc/Test"").

Admin rights are required to execute this command.
This command commits an open transaction in this connection.
","
CREATE LINKED TABLE LINK('org.h2.Driver', 'jdbc:h2:test2',
    'sa', 'sa', 'TEST');
CREATE LINKED TABLE LINK('', 'jdbc:h2:test2', 'sa', 'sa',
    '(SELECT * FROM TEST WHERE ID>0)');
CREATE LINKED TABLE LINK('javax.naming.InitialContext',
    'java:comp/env/jdbc/Test', NULL, NULL,
    '(SELECT * FROM TEST WHERE ID>0)');
"

"Commands (DDL)","CREATE ROLE","
CREATE ROLE [ IF NOT EXISTS ] newRoleName
","
Creates a new role.
This command commits an open transaction in this connection.
","
CREATE ROLE READONLY
"

"Commands (DDL)","CREATE SCHEMA","
CREATE SCHEMA [ IF NOT EXISTS ] name
[ AUTHORIZATION ownerUserName ]
[ WITH tableEngineParamName [,...] ]
","
Creates a new schema. If no owner is specified, the current user is used. The
user that executes the command must have admin rights, as well as the owner.
Specifying the owner currently has no effect.
Optional table engine parameters are used when CREATE TABLE command
is run on this schema without having its engine params set.

This command commits an open transaction in this connection.
","
CREATE SCHEMA TEST_SCHEMA AUTHORIZATION SA
"

"Commands (DDL)","CREATE SEQUENCE","
CREATE SEQUENCE [ IF NOT EXISTS ] newSequenceName
[ START WITH long ]
[ INCREMENT BY long ]
[ MINVALUE long | NOMINVALUE | NO MINVALUE ]
[ MAXVALUE long | NOMAXVALUE | NO MAXVALUE ]
[ CYCLE long | NOCYCLE | NO CYCLE ]
[ CACHE long | NOCACHE | NO CACHE ]
","
Creates a new sequence.
The data type of a sequence is BIGINT.
Used values are never re-used, even when the transaction is rolled back.

The cache is the number of pre-allocated numbers.
If the system crashes without closing the database, at most this many numbers are lost.
The default cache size is 32.
To disable caching, use the cache size 1 or lower.

This command commits an open transaction in this connection.
","
CREATE SEQUENCE SEQ_ID
"

"Commands (DDL)","CREATE TABLE","
CREATE [ CACHED | MEMORY ] [ TEMP | [ GLOBAL | LOCAL ] TEMPORARY ]
TABLE [ IF NOT EXISTS ] name
[ ( { columnName columnDefinition | constraint } [,...] ) ]
[ ENGINE tableEngineName ]
[ WITH tableEngineParamName [,...] ]
[ NOT PERSISTENT ] [ TRANSACTIONAL ]
[ AS select [ WITH [ NO ] DATA ] ]","
Creates a new table.

Cached tables (the default for regular tables) are persistent,
and the number of rows is not limited by the main memory.
Memory tables (the default for temporary tables) are persistent,
but the index data is kept in main memory,
that means memory tables should not get too large.

Temporary tables are deleted when closing or opening a database.
Temporary tables can be global (accessible by all connections)
or local (only accessible by the current connection).
The default for temporary tables is global.
Indexes of temporary tables are kept fully in main memory,
unless the temporary table is created using CREATE CACHED TABLE.

The ENGINE option is only required when custom table implementations are used.
The table engine class must implement the interface ""org.h2.api.TableEngine"".
Any table engine parameters are passed down in the tableEngineParams field of the CreateTableData object.

Either ENGINE, or WITH (table engine params), or both may be specified. If ENGINE is not specified
in CREATE TABLE, then the engine specified by DEFAULT_TABLE_ENGINE option of database params is used.

Tables with the NOT PERSISTENT modifier are kept fully in memory, and all
rows are lost when the database is closed.

The column definition is optional if a query is specified.
In that case the column list of the query is used.
If the query is specified its results are inserted into created table unless WITH NO DATA is specified.

This command commits an open transaction, except when using
TRANSACTIONAL (only supported for temporary tables).
","
CREATE TABLE TEST(ID INT PRIMARY KEY, NAME VARCHAR(255))
"

"Commands (DDL)","CREATE TRIGGER","
CREATE TRIGGER [ IF NOT EXISTS ] newTriggerName
{ BEFORE | AFTER | INSTEAD OF }
{ INSERT | UPDATE | DELETE | SELECT | ROLLBACK }
[,...] ON tableName [ FOR EACH ROW ]
[ QUEUE int ] [ NOWAIT ]
{ CALL triggeredClassName | AS sourceCodeString }
","
Creates a new trigger.
The trigger class must be public and implement ""org.h2.api.Trigger"".
Inner classes are not supported.
The class must be available in the classpath of the database engine
(when using the server mode, it must be in the classpath of the server).

The sourceCodeString must define a single method with no parameters that returns ""org.h2.api.Trigger"".
See CREATE ALIAS for requirements regarding the compilation.
Alternatively, javax.script.ScriptEngineManager can be used to create an instance of ""org.h2.api.Trigger"".
Currently javascript (included in every JRE) and ruby (with JRuby) are supported.
In that case the source must begin respectively with ""//javascript"" or ""#ruby"".

BEFORE triggers are called after data conversion is made, default values are set,
null and length constraint checks have been made;
but before other constraints have been checked.
If there are multiple triggers, the order in which they are called is undefined.

ROLLBACK can be specified in combination with INSERT, UPDATE, and DELETE.
Only row based AFTER trigger can be called on ROLLBACK.
Exceptions that occur within such triggers are ignored.
As the operations that occur within a trigger are part of the transaction,
ROLLBACK triggers are only required if an operation communicates outside of the database.

INSTEAD OF triggers are implicitly row based and behave like BEFORE triggers.
Only the first such trigger is called. Such triggers on views are supported.
They can be used to make views updatable.

A BEFORE SELECT trigger is fired just before the database engine tries to read from the table.
The trigger can be used to update a table on demand.
The trigger is called with both 'old' and 'new' set to null.

The MERGE statement will call both INSERT and UPDATE triggers.
Not supported are SELECT triggers with the option FOR EACH ROW,
and AFTER SELECT triggers.

Committing or rolling back a transaction within a trigger is not allowed, except for SELECT triggers.

By default a trigger is called once for each statement, without the old and new rows.
FOR EACH ROW triggers are called once for each inserted, updated, or deleted row.

QUEUE is implemented for syntax compatibility with HSQL and has no effect.

The trigger need to be created in the same schema as the table.
The schema name does not need to be specified when creating the trigger.

This command commits an open transaction in this connection.
","
CREATE TRIGGER TRIG_INS BEFORE INSERT ON TEST FOR EACH ROW CALL ""MyTrigger"";
CREATE TRIGGER TRIG_SRC BEFORE INSERT ON TEST AS $$org.h2.api.Trigger create() { return new MyTrigger(""constructorParam""); } $$;
CREATE TRIGGER TRIG_JS BEFORE INSERT ON TEST AS $$//javascript\nreturn new Packages.MyTrigger(""constructorParam""); $$;
CREATE TRIGGER TRIG_RUBY BEFORE INSERT ON TEST AS $$#ruby\nJava::MyPackage::MyTrigger.new(""constructorParam"") $$;
"
"Commands (DDL)","CREATE USER","
CREATE USER [ IF NOT EXISTS ] newUserName
{ PASSWORD string | SALT bytes HASH bytes } [ ADMIN ]
","
Creates a new user. For compatibility, only unquoted or uppercase user names are allowed.
The password must be in single quotes. It is case sensitive and can contain spaces.
The salt and hash values are hex strings.

Admin rights are required to execute this command.
This command commits an open transaction in this connection.
","
CREATE USER GUEST PASSWORD 'abc'
"

"Commands (DDL)","CREATE VIEW","
CREATE [ OR REPLACE ] [ FORCE ] VIEW [ IF NOT EXISTS ] newViewName
[ ( columnName [,...] ) ] AS select
","
Creates a new view. If the force option is used, then the view is created even
if the underlying table(s) don't exist.

If the OR REPLACE clause is used an existing view will be replaced, and any
dependent views will not need to be recreated. If dependent views will become
invalid as a result of the change an error will be generated, but this error
can be ignored if the FORCE clause is also used.

Views are not updatable except when using 'instead of' triggers.

Admin rights are required to execute this command.
This command commits an open transaction in this connection.
","
CREATE VIEW TEST_VIEW AS SELECT * FROM TEST WHERE ID < 100
"

"Commands (DDL)","DROP AGGREGATE","
DROP AGGREGATE [ IF EXISTS ] aggregateName
","
Drops an existing user-defined aggregate function.

Admin rights are required to execute this command.
This command commits an open transaction in this connection.
","
DROP AGGREGATE SIMPLE_MEDIAN
"

"Commands (DDL)","DROP ALIAS","
DROP ALIAS [ IF EXISTS ] existingFunctionAliasName
","
Drops an existing function alias.

Admin rights are required to execute this command.
This command commits an open transaction in this connection.
","
DROP ALIAS MY_SQRT
"

"Commands (DDL)","DROP ALL OBJECTS","
DROP ALL OBJECTS [ DELETE FILES ]
","
Drops all existing views, tables, sequences, schemas, function aliases, roles,
user-defined aggregate functions, domains, and users (except the current user).
If DELETE FILES is specified, the database files will be removed when the last
user disconnects from the database. Warning: this command can not be rolled
back.

Admin rights are required to execute this command.
","
DROP ALL OBJECTS
"

"Commands (DDL)","DROP CONSTANT","
DROP CONSTANT [ IF EXISTS ] constantName
","
Drops a constant.
This command commits an open transaction in this connection.
","
DROP CONSTANT ONE
"

"Commands (DDL)","DROP DOMAIN","
DROP DOMAIN [ IF EXISTS ] domainName [ RESTRICT | CASCADE ]
","
Drops a data type (domain).
The command will fail if it is referenced by a column (the default).
Column descriptors are replaced with original definition of specified domain if the CASCADE clause is used.
This command commits an open transaction in this connection.
","
DROP DOMAIN EMAIL
"

"Commands (DDL)","DROP INDEX","
DROP INDEX [ IF EXISTS ] indexName
","
Drops an index.
This command commits an open transaction in this connection.
","
DROP INDEX IF EXISTS IDXNAME
"

"Commands (DDL)","DROP ROLE","
DROP ROLE [ IF EXISTS ] roleName
","
Drops a role.
This command commits an open transaction in this connection.
","
DROP ROLE READONLY
"

"Commands (DDL)","DROP SCHEMA","
DROP SCHEMA [ IF EXISTS ] schemaName [ RESTRICT | CASCADE ]
","
Drops a schema.
The command will fail if objects in this schema exist and the RESTRICT clause is used (the default).
All objects in this schema are dropped as well if the CASCADE clause is used.
This command commits an open transaction in this connection.
","
DROP SCHEMA TEST_SCHEMA
"

"Commands (DDL)","DROP SEQUENCE","
DROP SEQUENCE [ IF EXISTS ] sequenceName
","
Drops a sequence.
This command commits an open transaction in this connection.
","
DROP SEQUENCE SEQ_ID
"

"Commands (DDL)","DROP TABLE","
DROP TABLE [ IF EXISTS ] tableName [,...] [ RESTRICT | CASCADE ]
","
Drops an existing table, or a list of tables.
The command will fail if dependent objects exist and the RESTRICT clause is used (the default).
All dependent views and constraints are dropped as well if the CASCADE clause is used.
This command commits an open transaction in this connection.
","
DROP TABLE TEST
"

"Commands (DDL)","DROP TRIGGER","
DROP TRIGGER [ IF EXISTS ] triggerName
","
Drops an existing trigger.
This command commits an open transaction in this connection.
","
DROP TRIGGER TRIG_INS
"

"Commands (DDL)","DROP USER","
DROP USER [ IF EXISTS ] userName
","
Drops a user. The current user cannot be dropped.
For compatibility, only unquoted or uppercase user names are allowed.

Admin rights are required to execute this command.
This command commits an open transaction in this connection.
","
DROP USER TOM
"

"Commands (DDL)","DROP VIEW","
DROP VIEW [ IF EXISTS ] viewName [ RESTRICT | CASCADE ]
","
Drops an existing view.
All dependent views are dropped as well if the CASCADE clause is used (the default).
The command will fail if dependent views exist and the RESTRICT clause is used.
This command commits an open transaction in this connection.
","
DROP VIEW TEST_VIEW
"

"Commands (DDL)","TRUNCATE TABLE","
TRUNCATE TABLE tableName [ [ CONTINUE | RESTART ] IDENTITY ]
","
Removes all rows from a table.
Unlike DELETE FROM without where clause, this command can not be rolled back.
This command is faster than DELETE without where clause.
Only regular data tables without foreign key constraints can be truncated
(except if referential integrity is disabled for this database or for this table).
Linked tables can't be truncated.
If RESTART IDENTITY is specified next values for auto-incremented columns are restarted.

This command commits an open transaction in this connection.
","
TRUNCATE TABLE TEST
"

"Commands (Other)","CHECKPOINT","
CHECKPOINT
","
Flushes the data to disk.

Admin rights are required to execute this command.
","
CHECKPOINT
"

"Commands (Other)","CHECKPOINT SYNC","
CHECKPOINT SYNC
","
Flushes the data to disk and and forces all system buffers be written
to the underlying device.

Admin rights are required to execute this command.
","
CHECKPOINT SYNC
"

"Commands (Other)","COMMIT","
COMMIT [ WORK ]
","
Commits a transaction.
","
COMMIT
"

"Commands (Other)","COMMIT TRANSACTION","
COMMIT TRANSACTION transactionName
","
Sets the resolution of an in-doubt transaction to 'commit'.

Admin rights are required to execute this command.
This command is part of the 2-phase-commit protocol.
","
COMMIT TRANSACTION XID_TEST
"

"Commands (Other)","GRANT RIGHT","
GRANT { SELECT | INSERT | UPDATE | DELETE | ALL } [,...] ON
{ { SCHEMA schemaName } | { tableName [,...] } }
TO { PUBLIC | userName | roleName }
","
Grants rights for a table to a user or role.

Admin rights are required to execute this command.
This command commits an open transaction in this connection.
","
GRANT SELECT ON TEST TO READONLY
"

"Commands (Other)","GRANT ALTER ANY SCHEMA","
GRANT ALTER ANY SCHEMA TO userName
","
Grant schema altering rights to a user.

Admin rights are required to execute this command.
This command commits an open transaction in this connection.
","
GRANT ALTER ANY SCHEMA TO Bob
"

"Commands (Other)","GRANT ROLE","
GRANT roleName TO { PUBLIC | userName | roleName }
","
Grants a role to a user or role.

Admin rights are required to execute this command.
This command commits an open transaction in this connection.
","
GRANT READONLY TO PUBLIC
"

"Commands (Other)","HELP","
HELP [ anything [...] ]
","
Displays the help pages of SQL commands or keywords.
","
HELP SELECT
"

"Commands (Other)","PREPARE COMMIT","
PREPARE COMMIT newTransactionName
","
Prepares committing a transaction.
This command is part of the 2-phase-commit protocol.
","
PREPARE COMMIT XID_TEST
"

"Commands (Other)","REVOKE RIGHT","
REVOKE { SELECT | INSERT | UPDATE | DELETE | ALL } [,...] ON
{ { SCHEMA schemaName } | { tableName [,...] } }
FROM { PUBLIC | userName | roleName }
","
Removes rights for a table from a user or role.

Admin rights are required to execute this command.
This command commits an open transaction in this connection.
","
REVOKE SELECT ON TEST FROM READONLY
"

"Commands (Other)","REVOKE ROLE","
REVOKE roleName FROM { PUBLIC | userName | roleName }
","
Removes a role from a user or role.

Admin rights are required to execute this command.
This command commits an open transaction in this connection.
","
REVOKE READONLY FROM TOM
"

"Commands (Other)","ROLLBACK","
ROLLBACK [ TO SAVEPOINT savepointName ]
","
Rolls back a transaction. If a savepoint name is used, the transaction is only
rolled back to the specified savepoint.
","
ROLLBACK
"

"Commands (Other)","ROLLBACK TRANSACTION","
ROLLBACK TRANSACTION transactionName
","
Sets the resolution of an in-doubt transaction to 'rollback'.

Admin rights are required to execute this command.
This command is part of the 2-phase-commit protocol.
","
ROLLBACK TRANSACTION XID_TEST
"

"Commands (Other)","SAVEPOINT","
SAVEPOINT savepointName
","
Create a new savepoint. See also ROLLBACK.
Savepoints are only valid until the transaction is committed or rolled back.
","
SAVEPOINT HALF_DONE
"

"Commands (Other)","SET @","
SET @variableName [ = ] expression
","
Updates a user-defined variable.
Variables are not persisted and session scoped, that means only visible from within the session in which they are defined.
This command does not commit a transaction, and rollback does not affect it.
","
SET @TOTAL=0
"

"Commands (Other)","SET ALLOW_LITERALS","
SET ALLOW_LITERALS { NONE | ALL | NUMBERS }
","
This setting can help solve the SQL injection problem. By default, text and
number literals are allowed in SQL statements. However, this enables SQL
injection if the application dynamically builds SQL statements. SQL injection is
not possible if user data is set using parameters ('?').

NONE means literals of any kind are not allowed, only parameters and constants
are allowed. NUMBERS mean only numerical and boolean literals are allowed. ALL
means all literals are allowed (default).

See also CREATE CONSTANT.

Admin rights are required to execute this command, as it affects all connections.
This command commits an open transaction in this connection.
This setting is persistent.
This setting can be appended to the database URL: ""jdbc:h2:test;ALLOW_LITERALS=NONE""
","
SET ALLOW_LITERALS NONE
"

"Commands (Other)","SET AUTOCOMMIT","
SET AUTOCOMMIT { TRUE | ON | FALSE | OFF }
","
Switches auto commit on or off.
This setting can be appended to the database URL: ""jdbc:h2:test;AUTOCOMMIT=OFF"" -
however this will not work as expected when using a connection pool
(the connection pool manager will re-enable autocommit when returning
the connection to the pool, so autocommit will only be disabled the first
time the connection is used.
","
SET AUTOCOMMIT OFF
"

"Commands (Other)","SET CACHE_SIZE","
SET CACHE_SIZE int
","
Sets the size of the cache in KB (each KB being 1024 bytes) for the current database.
The default is 65536 per available GB of RAM, i.e. 64 MB per GB.
The value is rounded to the next higher power of two.
Depending on the virtual machine, the actual memory required may be higher.

This setting is persistent and affects all connections as there is only one cache per database.
Using a very small value (specially 0) will reduce performance a lot.
This setting only affects the database engine (the server in a client/server environment;
in embedded mode, the database engine is in the same process as the application).
It has no effect for in-memory databases.

Admin rights are required to execute this command, as it affects all connections.
This command commits an open transaction in this connection.
This setting is persistent.
This setting can be appended to the database URL: ""jdbc:h2:test;CACHE_SIZE=8192""
","
SET CACHE_SIZE 8192
"

"Commands (Other)","SET CLUSTER","
SET CLUSTER serverListString
","
This command should not be used directly by an application, the statement is
executed automatically by the system. The behavior may change in future
releases. Sets the cluster server list. An empty string switches off the cluster
mode. Switching on the cluster mode requires admin rights, but any user can
switch it off (this is automatically done when the client detects the other
server is not responding).

This command is effective immediately, but does not commit an open transaction.
","
SET CLUSTER ''
"

"Commands (Other)","SET BINARY_COLLATION","
SET BINARY_COLLATION
{ UNSIGNED | SIGNED } ] }
","
Sets the collation used for comparing BINARY columns, the default is SIGNED
for version 1.3 and older, and UNSIGNED for version 1.4 and newer.
This command can only be executed if there are no tables defined.

Admin rights are required to execute this command.
This command commits an open transaction in this connection.
This setting is persistent.
","
SET BINARY_COLLATION SIGNED
"

"Commands (Other)","SET BUILTIN_ALIAS_OVERRIDE","
SET BUILTIN_ALIAS_OVERRIDE
{ TRUE | FALSE } ] }
","
Allows the overriding of the builtin system date/time functions
for unit testing purposes.

Admin rights are required to execute this command.
This command commits an open transaction in this connection.
","
SET BUILTIN_ALIAS_OVERRIDE TRUE
"

"Commands (Other)","SET COLLATION","
SET [ DATABASE ] COLLATION
{ OFF | collationName
    [ STRENGTH { PRIMARY | SECONDARY | TERTIARY | IDENTICAL } ] }
","
Sets the collation used for comparing strings.
This command can only be executed if there are no tables defined.
See ""java.text.Collator"" for details about the supported collations and the STRENGTH
(PRIMARY is usually case- and umlaut-insensitive; SECONDARY is case-insensitive but umlaut-sensitive;
TERTIARY is both case- and umlaut-sensitive; IDENTICAL is sensitive to all differences and only affects ordering).

The ICU4J collator is used if it is in the classpath.
It is also used if the collation name starts with ICU4J_
(in that case, the ICU4J must be in the classpath, otherwise an exception is thrown).
The default collator is used if the collation name starts with DEFAULT_
(even if ICU4J is in the classpath).
The charset collator is used if the collation name starts with CHARSET_ (e.g. CHARSET_CP500). This collator sorts
strings according to the binary representation in the given charset.

Admin rights are required to execute this command.
This command commits an open transaction in this connection.
This setting is persistent.
This setting can be appended to the database URL: ""jdbc:h2:test;COLLATION='ENGLISH'""
","
SET COLLATION ENGLISH
SET COLLATION CHARSET_CP500
"

"Commands (Other)","SET COMPRESS_LOB","
SET COMPRESS_LOB { NO | LZF | DEFLATE }
","
This feature is only available for the PageStore storage engine.
For the MVStore engine (the default for H2 version 1.4.x),
append "";COMPRESS=TRUE"" to the database URL instead.

Sets the compression algorithm for BLOB and CLOB data. Compression is usually
slower, but needs less disk space. LZF is faster but uses more space.

Admin rights are required to execute this command, as it affects all connections.
This command commits an open transaction in this connection.
This setting is persistent.
","
SET COMPRESS_LOB LZF
"

"Commands (Other)","SET DATABASE_EVENT_LISTENER","
SET DATABASE_EVENT_LISTENER classNameString
","
Sets the event listener class. An empty string ('') means no listener should be
used. This setting is not persistent.

Admin rights are required to execute this command, except if it is set when
opening the database (in this case it is reset just after opening the database).
This setting can be appended to the database URL: ""jdbc:h2:test;DATABASE_EVENT_LISTENER='sample.MyListener'""
","
SET DATABASE_EVENT_LISTENER 'sample.MyListener'
"

"Commands (Other)","SET DB_CLOSE_DELAY","
SET DB_CLOSE_DELAY int
","
Sets the delay for closing a database if all connections are closed.
The value -1 means the database is never closed until the close delay is set to some other value or SHUTDOWN is called.
The value 0 means no delay (default; the database is closed if the last connection to it is closed).
Values 1 and larger mean the number of seconds the database is left open after closing the last connection.

If the application exits normally or System.exit is called, the database is closed immediately, even if a delay is set.

Admin rights are required to execute this command, as it affects all connections.
This command commits an open transaction in this connection.
This setting is persistent.
This setting can be appended to the database URL: ""jdbc:h2:test;DB_CLOSE_DELAY=-1""
","
SET DB_CLOSE_DELAY -1
"

"Commands (Other)","SET DEFAULT_LOCK_TIMEOUT","
SET DEFAULT LOCK_TIMEOUT int
","
Sets the default lock timeout (in milliseconds) in this database that is used
for the new sessions. The default value for this setting is 1000 (one second).

Admin rights are required to execute this command, as it affects all connections.
This command commits an open transaction in this connection.
This setting is persistent.
","
SET DEFAULT_LOCK_TIMEOUT 5000
"

"Commands (Other)","SET DEFAULT_TABLE_TYPE","
SET DEFAULT_TABLE_TYPE { MEMORY | CACHED }
","
Sets the default table storage type that is used when creating new tables.
Memory tables are kept fully in the main memory (including indexes), however
the data is still stored in the database file. The size of memory tables is
limited by the memory. The default is CACHED.

Admin rights are required to execute this command, as it affects all connections.
This command commits an open transaction in this connection.
This setting is persistent.
It has no effect for in-memory databases.
","
SET DEFAULT_TABLE_TYPE MEMORY
"

"Commands (Other)","SET EXCLUSIVE","
SET EXCLUSIVE { 0 | 1 | 2 }
","
Switched the database to exclusive mode (1, 2) and back to normal mode (0).

In exclusive mode, new connections are rejected, and operations by
other connections are paused until the exclusive mode is disabled.
When using the value 1, existing connections stay open.
When using the value 2, all existing connections are closed
(and current transactions are rolled back) except the connection
that executes SET EXCLUSIVE.
Only the connection that set the exclusive mode can disable it.
When the connection is closed, it is automatically disabled.

Admin rights are required to execute this command.
This command commits an open transaction in this connection.
","
SET EXCLUSIVE 1
"

"Commands (Other)","SET IGNORECASE","
SET IGNORECASE { TRUE | FALSE }
","
If IGNORECASE is enabled, text columns in newly created tables will be
case-insensitive. Already existing tables are not affected. The effect of
case-insensitive columns is similar to using a collation with strength PRIMARY.
Case-insensitive columns are compared faster than when using a collation.
String literals and parameters are however still considered case sensitive even if this option is set.

Admin rights are required to execute this command, as it affects all connections.
This command commits an open transaction in this connection.
This setting is persistent.
This setting can be appended to the database URL: ""jdbc:h2:test;IGNORECASE=TRUE""
","
SET IGNORECASE TRUE
"

"Commands (Other)","SET JAVA_OBJECT_SERIALIZER","
SET JAVA_OBJECT_SERIALIZER
{ null | className }
","
Sets the object used to serialize and deserialize java objects being stored in column of type OTHER.
The serializer class must be public and implement ""org.h2.api.JavaObjectSerializer"".
Inner classes are not supported.
The class must be available in the classpath of the database engine
(when using the server mode, it must be both in the classpath of the server and the client).
This command can only be executed if there are no tables defined.

Admin rights are required to execute this command.
This command commits an open transaction in this connection.
This setting is persistent.
This setting can be appended to the database URL: ""jdbc:h2:test;JAVA_OBJECT_SERIALIZER='com.acme.SerializerClassName'""
","
SET JAVA_OBJECT_SERIALIZER 'com.acme.SerializerClassName'
"


"Commands (Other)","SET LAZY_QUERY_EXECUTION","
SET LAZY_QUERY_EXECUTION int
","
Sets the lazy query execution mode. The values 0, 1 are supported.

If true, then large results are retrieved in chunks.

Note that not all queries support this feature, queries which do not are processed normally.

Admin rights are required to execute this command, as it affects all connections.
This command commits an open transaction in this connection.
This setting is not persistent.
This setting can be appended to the database URL: ""jdbc:h2:test;LAZY_QUERY_EXECUTION=1""
","
SET LAZY_QUERY_EXECUTION 1
"

"Commands (Other)","SET LOG","
SET LOG int
","
Sets the transaction log mode. The values 0, 1, and 2 are supported, the default is 2.
This setting affects all connections.

LOG 0 means the transaction log is disabled completely. It is the fastest mode,
but also the most dangerous: if the process is killed while the database is open in this mode,
the data might be lost. It must only be used if this is not a problem, for example when
initially loading a database, or when running tests.

LOG 1 means the transaction log is enabled, but FileDescriptor.sync is disabled.
This setting is about half as fast as with LOG 0. This setting is useful if no protection
against power failure is required, but the data must be protected against killing the process.

LOG 2 (the default) means the transaction log is enabled, and FileDescriptor.sync is called
for each checkpoint. This setting is about half as fast as LOG 1. Depending on the
file system, this will also protect against power failure in the majority if cases.

Admin rights are required to execute this command, as it affects all connections.
This command commits an open transaction in this connection.
This setting is not persistent.
This setting can be appended to the database URL: ""jdbc:h2:test;LOG=0""
","
SET LOG 1
"

"Commands (Other)","SET LOCK_MODE","
SET LOCK_MODE int
","
Sets the lock mode. The values 0, 1, 2, and 3 are supported. The default is 3
(READ_COMMITTED). This setting affects all connections.

The value 0 means no locking (should only be used for testing; also known as
READ_UNCOMMITTED). Please note that using SET LOCK_MODE 0 while at the same time
using multiple connections may result in inconsistent transactions.

The value 1 means table level locking (also known as SERIALIZABLE).

The value 2 means table level locking with garbage collection (if the
application does not close all connections).

The value 3 means table level locking, but read locks are released immediately
(default; also known as READ_COMMITTED).

Admin rights are required to execute this command, as it affects all connections.
This command commits an open transaction in this connection.
This setting is persistent.
This setting can be appended to the database URL: ""jdbc:h2:test;LOCK_MODE=3""
","
SET LOCK_MODE 1
"

"Commands (Other)","SET LOCK_TIMEOUT","
SET LOCK_TIMEOUT int
","
Sets the lock timeout (in milliseconds) for the current session. The default
value for this setting is 1000 (one second).

This command does not commit a transaction, and rollback does not affect it.
This setting can be appended to the database URL: ""jdbc:h2:test;LOCK_TIMEOUT=10000""
","
SET LOCK_TIMEOUT 1000
"

"Commands (Other)","SET MAX_LENGTH_INPLACE_LOB","
SET MAX_LENGTH_INPLACE_LOB int
","
Sets the maximum size of an in-place LOB object.

This is the maximum length of an LOB that is stored with the record itself,
and the default value is 128.

Admin rights are required to execute this command, as it affects all connections.
This command commits an open transaction in this connection.
This setting is persistent.
","
SET MAX_LENGTH_INPLACE_LOB 128
"

"Commands (Other)","SET MAX_LOG_SIZE","
SET MAX_LOG_SIZE int
","
Sets the maximum size of the transaction log, in megabytes.
If the log is larger, and if there is no open transaction, the transaction log is truncated.
If there is an open transaction, the transaction log will continue to grow however.
The default max size is 16 MB.
This setting has no effect for in-memory databases.

Admin rights are required to execute this command, as it affects all connections.
This command commits an open transaction in this connection.
This setting is persistent.
","
SET MAX_LOG_SIZE 2
"

"Commands (Other)","SET MAX_MEMORY_ROWS","
SET MAX_MEMORY_ROWS int
","
The maximum number of rows in a result set that are kept in-memory. If more rows
are read, then the rows are buffered to disk.
The default is 40000 per GB of available RAM.

Admin rights are required to execute this command, as it affects all connections.
This command commits an open transaction in this connection.
This setting is persistent.
It has no effect for in-memory databases.
","
SET MAX_MEMORY_ROWS 1000
"

"Commands (Other)","SET MAX_MEMORY_UNDO","
SET MAX_MEMORY_UNDO int
","
The maximum number of undo records per a session that are kept in-memory.
If a transaction is larger, the records are buffered to disk.
The default value is 50000.
Changes to tables without a primary key can not be buffered to disk.
This setting is not supported when using multi-version concurrency.

Admin rights are required to execute this command, as it affects all connections.
This command commits an open transaction in this connection.
This setting is persistent.
It has no effect for in-memory databases.
","
SET MAX_MEMORY_UNDO 1000
"

"Commands (Other)","SET MAX_OPERATION_MEMORY","
SET MAX_OPERATION_MEMORY int
","
Sets the maximum memory used for large operations (delete and insert), in bytes.
Operations that use more memory are buffered to disk, slowing down the
operation. The default max size is 100000. 0 means no limit.

This setting is not persistent.
Admin rights are required to execute this command, as it affects all connections.
It has no effect for in-memory databases.
This setting can be appended to the database URL: ""jdbc:h2:test;MAX_OPERATION_MEMORY=10000""
","
SET MAX_OPERATION_MEMORY 0
"

"Commands (Other)","SET MODE","
SET MODE { REGULAR | DB2 | DERBY | HSQLDB | MSSQLSERVER | MYSQL | ORACLE | POSTGRESQL }
","
Changes to another database compatibility mode. For details, see Compatibility
Modes in the feature section.

This setting is not persistent.
Admin rights are required to execute this command, as it affects all connections.
This command commits an open transaction in this connection.
This setting can be appended to the database URL: ""jdbc:h2:test;MODE=MYSQL""
","
SET MODE HSQLDB
"

"Commands (Other)","SET MULTI_THREADED","
SET MULTI_THREADED { 0 | 1 }
","
Enabled (1) or disabled (0) multi-threading inside the database engine.
MULTI_THREADED is enabled by default with default MVStore storage engine.
MULTI_THREADED is disabled by default when using PageStore storage engine, enabling this with PageStore is experimental only.

This is a global setting, which means it is not possible to open multiple databases with different modes at the same time in the same virtual machine.
This setting is not persistent, however the value is kept until the virtual machine exits or it is changed.

Admin rights are required to execute this command, as it affects all connections.
This command commits an open transaction in this connection.
This setting can be appended to the database URL: ""jdbc:h2:test;MULTI_THREADED=1""
","
SET MULTI_THREADED 1
"

"Commands (Other)","SET OPTIMIZE_REUSE_RESULTS","
SET OPTIMIZE_REUSE_RESULTS { 0 | 1 }
","
Enabled (1) or disabled (0) the result reuse optimization. If enabled,
subqueries and views used as subqueries are only re-run if the data in one of
the tables was changed. This option is enabled by default.

Admin rights are required to execute this command, as it affects all connections.
This command commits an open transaction in this connection.
This setting can be appended to the database URL: ""jdbc:h2:test;OPTIMIZE_REUSE_RESULTS=0""
","
SET OPTIMIZE_REUSE_RESULTS 0
"

"Commands (Other)","SET PASSWORD","
SET PASSWORD string
","
Changes the password of the current user. The password must be in single quotes.
It is case sensitive and can contain spaces.

This command commits an open transaction in this connection.
","
SET PASSWORD 'abcstzri!.5'
"

"Commands (Other)","SET QUERY_STATISTICS","
SET QUERY_STATISTICS { TRUE | FALSE }
","
Disabled or enables query statistics gathering for the whole database.
The statistics are reflected in the INFORMATION_SCHEMA.QUERY_STATISTICS meta-table.

This setting is not persistent.
This command commits an open transaction in this connection.
Admin rights are required to execute this command, as it affects all connections.
","
SET QUERY_STATISTICS FALSE
"

"Commands (Other)","SET QUERY_STATISTICS_MAX_ENTRIES","
SET QUERY_STATISTICS int
","
Set the maximum number of entries in query statistics meta-table.
Default value is 100.

This setting is not persistent.
This command commits an open transaction in this connection.
Admin rights are required to execute this command, as it affects all connections.
","
SET QUERY_STATISTICS_MAX_ENTRIES 500
"

"Commands (Other)","SET QUERY_TIMEOUT","
SET QUERY_TIMEOUT int
","
Set the query timeout of the current session to the given value. The timeout is
in milliseconds. All kinds of statements will throw an exception if they take
longer than the given value. The default timeout is 0, meaning no timeout.

This command does not commit a transaction, and rollback does not affect it.
","
SET QUERY_TIMEOUT 10000
"

"Commands (Other)","SET REFERENTIAL_INTEGRITY","
SET REFERENTIAL_INTEGRITY { TRUE | FALSE }
","
Disabled or enables referential integrity checking for the whole database.
Enabling it does not check existing data. Use ALTER TABLE SET to disable it only
for one table.

This setting is not persistent.
This command commits an open transaction in this connection.
Admin rights are required to execute this command, as it affects all connections.
","
SET REFERENTIAL_INTEGRITY FALSE
"

"Commands (Other)","SET RETENTION_TIME","
SET RETENTION_TIME int
","
This property is only used when using the MVStore storage engine.
How long to retain old, persisted data, in milliseconds.
The default is 45000 (45 seconds), 0 means overwrite data as early as possible.
It is assumed that a file system and hard disk will flush all write buffers within this time.
Using a lower value might be dangerous, unless the file system and hard disk flush the buffers earlier.
To manually flush the buffers, use CHECKPOINT SYNC,
however please note that according to various tests this does not always work as expected
depending on the operating system and hardware.

Admin rights are required to execute this command, as it affects all connections.
This command commits an open transaction in this connection.
This setting is persistent.
This setting can be appended to the database URL: ""jdbc:h2:test;RETENTION_TIME=0""
","
SET RETENTION_TIME 0
"

"Commands (Other)","SET SALT HASH","
SET SALT bytes HASH bytes
","
Sets the password salt and hash for the current user. The password must be in
single quotes. It is case sensitive and can contain spaces.

This command commits an open transaction in this connection.
","
SET SALT '00' HASH '1122'
"

"Commands (Other)","SET SCHEMA","
SET SCHEMA schemaName
","
Changes the default schema of the current connection. The default schema is used
in statements where no schema is set explicitly. The default schema for new
connections is PUBLIC.

This command does not commit a transaction, and rollback does not affect it.
This setting can be appended to the database URL: ""jdbc:h2:test;SCHEMA=ABC""
","
SET SCHEMA INFORMATION_SCHEMA
"

"Commands (Other)","SET SCHEMA_SEARCH_PATH","
SET SCHEMA_SEARCH_PATH schemaName [,...]
","
Changes the schema search path of the current connection. The default schema is
used in statements where no schema is set explicitly. The default schema for new
connections is PUBLIC.

This command does not commit a transaction, and rollback does not affect it.
This setting can be appended to the database URL: ""jdbc:h2:test;SCHEMA_SEARCH_PATH=ABC,DEF""
","
SET SCHEMA_SEARCH_PATH INFORMATION_SCHEMA, PUBLIC
"

"Commands (Other)","SET THROTTLE","
SET THROTTLE int
","
Sets the throttle for the current connection. The value is the number of
milliseconds delay after each 50 ms. The default value is 0 (throttling
disabled).

This command does not commit a transaction, and rollback does not affect it.
This setting can be appended to the database URL: ""jdbc:h2:test;THROTTLE=50""
","
SET THROTTLE 200
"

"Commands (Other)","SET TRACE_LEVEL","
SET { TRACE_LEVEL_FILE | TRACE_LEVEL_SYSTEM_OUT } int
","
Sets the trace level for file the file or system out stream. Levels are: 0=off,
1=error, 2=info, 3=debug. The default level is 1 for file and 0 for system out.
To use SLF4J, append "";TRACE_LEVEL_FILE=4"" to the database URL when opening the database.

This setting is not persistent.
Admin rights are required to execute this command, as it affects all connections.
This command does not commit a transaction, and rollback does not affect it.
This setting can be appended to the database URL: ""jdbc:h2:test;TRACE_LEVEL_SYSTEM_OUT=3""
","
SET TRACE_LEVEL_SYSTEM_OUT 3
"

"Commands (Other)","SET TRACE_MAX_FILE_SIZE","
SET TRACE_MAX_FILE_SIZE int
","
Sets the maximum trace file size. If the file exceeds the limit, the file is
renamed to .old and a new file is created. If another .old file exists, it is
deleted. The default max size is 16 MB.

This setting is persistent.
Admin rights are required to execute this command, as it affects all connections.
This command commits an open transaction in this connection.
This setting can be appended to the database URL: ""jdbc:h2:test;TRACE_MAX_FILE_SIZE=3""
","
SET TRACE_MAX_FILE_SIZE 10
"

"Commands (Other)","SET UNDO_LOG","
SET UNDO_LOG int
","
Enables (1) or disables (0) the per session undo log. The undo log is enabled by
default. When disabled, transactions can not be rolled back. This setting should
only be used for bulk operations that don't need to be atomic.

This command commits an open transaction in this connection.
","
SET UNDO_LOG 0
"

"Commands (Other)","SET WRITE_DELAY","
SET WRITE_DELAY int
","
Set the maximum delay between a commit and flushing the log, in milliseconds.
This setting is persistent. The default is 500 ms.

Admin rights are required to execute this command, as it affects all connections.
This command commits an open transaction in this connection.
This setting can be appended to the database URL: ""jdbc:h2:test;WRITE_DELAY=0""
","
SET WRITE_DELAY 2000
"

"Commands (Other)","SHUTDOWN","
SHUTDOWN [ IMMEDIATELY | COMPACT | DEFRAG ]
","
This statement closes all open connections to the database and closes the
database. This command is usually not required, as the database is
closed automatically when the last connection to it is closed.

If no option is used, then the database is closed normally.
All connections are closed, open transactions are rolled back.

SHUTDOWN COMPACT fully compacts the database (re-creating the database may further reduce the database size).
If the database is closed normally (using SHUTDOWN or by closing all connections), then the database is also compacted,
but only for at most the time defined by the database setting ""h2.maxCompactTime"" in milliseconds (see there).

SHUTDOWN IMMEDIATELY closes the database files without any cleanup and without compacting.

SHUTDOWN DEFRAG re-orders the pages when closing the database so that table scans are faster. In case of MVStore it is currently equivalent to COMPACT.

Admin rights are required to execute this command.
","
SHUTDOWN COMPACT
"

"Datetime fields","Datetime field","
yearField | monthField | dayOfMonthField
    | hourField | minuteField | secondField
    | millisecondField | microsecondField | nanosecondField
    | timezoneHourField | timezoneMinuteField
    | dayOfWeekField | isoDayOfWeekField
    | weekOfYearField | isoWeekOfYearField
    | quarterField | dayOfYearField | epochField
","
Fields for EXTRACT, DATEADD, and DATEDIFF functions.
","
YEAR
"

"Datetime fields","Year field","
YEAR | YYYY | YY | SQL_TSI_YEAR
","
Year.
","
YEAR
"

"Datetime fields","Month field","
MONTH | MM | M | SQL_TSI_MONTH
","
Month (1-12).
","
MONTH
"

"Datetime fields","Day of month field","
DAY | DD | D | SQL_TSI_DAY
","
Day of month (1-31).
","
DAY
"

"Datetime fields","Hour field","
HOUR | HH | SQL_TSI_HOUR
","
Hour (0-23).
","
HOUR
"

"Datetime fields","Minute field","
MINUTE | MI | N | SQL_TSI_MINUTE
","
Minute (0-59).
","
MINUTE
"

"Datetime fields","Second field","
SECOND | SS | S | SQL_TSI_SECOND
","
Second (0-59).
","
SECOND
"

"Datetime fields","Millisecond field","
MILLISECOND | MS
","
Millisecond (0-999).
","
MILLISECOND
"

"Datetime fields","Microsecond field","
MICROSECOND | MCS
","
Microsecond (0-999999).
","
MICROSECOND
"

"Datetime fields","Nanosecond field","
NANOSECOND | NS
","
Nanosecond (0-999999999).
","
NANOSECOND
"

"Datetime fields","Timezone hour field","
TIMEZONE_HOUR
","
Timezone hour (from -18 to +18).
","
TIMEZONE_HOUR
"

"Datetime fields","Timezone minute field","
TIMEZONE_MINUTE
","
Timezone minute (from -59 to +59).
","
TIMEZONE_MINUTE
"

"Datetime fields","Day of week field","
DAY_OF_WEEK | DAYOFWEEK | DOW
","
Day of week (1-7). Sunday is 1.
","
DAY_OF_WEEK
"

"Datetime fields","ISO day of week field","
ISO_DAY_OF_WEEK
","
ISO day of week (1-7). Monday is 1.
","
ISO_DAY_OF_WEEK
"

"Datetime fields","Week of year field","
WEEK | WW | W | SQL_TSI_WEEK
","
Week of year (1-53).
EXTRACT function uses local rules to get number of week in year.
DATEDIFF function uses Sunday as a first day of week.
","
WEEK
"

"Datetime fields","ISO week of year field","
ISO_WEEK
","
ISO week of year (1-53).
ISO definition is used when first week of year should have at least four days
and week is started with Monday.
","
ISO_WEEK
"

"Datetime fields","Quarter field","
QUARTER
","
Quarter (1-4).
","
QUARTER
"

"Datetime fields","Day of year field","
DAYOFYEAR | DAY_OF_YEAR | DOY | DY
","
Day of year (1-366).
","
DAYOFYEAR
"

"Datetime fields","Epoch field","
EPOCH
","
For TIMESTAMP values number of seconds since 1970-01-01 00:00:00 in local time zone.
For TIMESTAMP WITH TIME ZONE values number of seconds since 1970-01-01 00:00:00 in UTC time zone.
For DATE values number of seconds since 1970-01-01.
For TIME values number of seconds since midnight.
","
EPOCH
"

"Other Grammar","Alias","
name
","
An alias is a name that is only valid in the context of the statement.
","
A
"

"Other Grammar","And Condition","
condition [ { AND condition } [...] ]
","
Value or condition.
","
ID=1 AND NAME='Hi'
"

"Other Grammar","Array","
( [ expression, [ expression [,...] ] ] )
","
An array of values. An empty array is '()'. Trailing commas are ignored.
An array with one element must contain a comma to be parsed as an array.
","
(1, 2)
(1, )
()
"

"Other Grammar","Boolean","
TRUE | FALSE
","
A boolean value.
","
TRUE
"

"Other Grammar","Bytes","
X'hex'
","
A binary value. The hex value is not case sensitive.
","
X'01FF'
"

"Other Grammar","Case","
CASE expression { WHEN expression THEN expression } [...]
[ ELSE expression ] END
","
Returns the first expression where the value is equal to the test expression. If
no else part is specified, return NULL.
","
CASE CNT WHEN 0 THEN 'No' WHEN 1 THEN 'One' ELSE 'Some' END
"

"Other Grammar","Case When","
CASE { WHEN expression THEN expression} [...]
[ ELSE expression ] END
","
Returns the first expression where the condition is true. If no else part is
specified, return NULL.
","
CASE WHEN CNT<10 THEN 'Low' ELSE 'High' END
"

"Other Grammar","Cipher","
AES
","
Only the algorithm AES (""AES-128"") is supported currently.
","
AES
"

"Other Grammar","Column Definition","
dataType [ VISIBLE | INVISIBLE ]
[ { DEFAULT expression | AS computedColumnExpression } ]
[ ON UPDATE expression ] [ [ NOT ] NULL ]
[ { AUTO_INCREMENT | IDENTITY } [ ( startInt [, incrementInt ] ) ] ]
[ SELECTIVITY selectivity ] [ COMMENT expression ]
[ PRIMARY KEY [ HASH ] | UNIQUE ] [ CHECK condition ]
","
Default expressions are used if no explicit value was used when adding a row.
The computed column expression is evaluated and assigned whenever the row changes.
On update column expression is used if row is updated,
at least one column have a new value that is different from its previous value
and value for this column is not set explicitly in update statement.

Identity and auto-increment columns are columns with a sequence as the
default. The column declared as the identity columns is implicitly the
primary key column of this table (unlike auto-increment columns).

The invisible column will not be displayed as a result of SELECT * query.
Otherwise, it works as normal column.

The options PRIMARY KEY, UNIQUE, and CHECK are not supported for ALTER statements.

Check constraints can reference columns of the table,
and they can reference objects that exist while the statement is executed.
Conditions are only checked when a row is added or modified
in the table where the constraint exists.

","
CREATE TABLE TEST(ID INT PRIMARY KEY, NAME VARCHAR(255) DEFAULT '');
CREATE TABLE TEST(ID BIGINT IDENTITY);
CREATE TABLE TEST(QUANTITY INT, PRICE DECIMAL, AMOUNT DECIMAL AS QUANTITY*PRICE);
"

"Other Grammar","Comments","
-- anythingUntilEndOfLine | // anythingUntilEndOfLine | /* anythingUntilEndComment */
","
Comments can be used anywhere in a command and are ignored by the database. Line
comments end with a newline. Block comments cannot be nested, but can be
multiple lines long.
","
// This is a comment
"

"Other Grammar","Compare","
<> | <= | >= | = | < | > | != | &&
","
Comparison operator. The operator != is the same as <>.
The operator ""&&"" means overlapping; it can only be used with geometry types.
","
<>
"

"Other Grammar","Condition","
operand [ conditionRightHandSide ] | NOT condition | EXISTS ( select )
","
Boolean value or condition.
","
ID<>2
"

"Other Grammar","Condition Right Hand Side","
compare { { { ALL | ANY | SOME } ( select ) } | operand }
    | IS [ NOT ] NULL
    | IS [ NOT ] [ DISTINCT FROM ] operand
    | BETWEEN operand AND operand
    | IN ( { select | expression [,...] } )
    | [ NOT ] [ LIKE | ILIKE ] operand [ ESCAPE string ]
    | [ NOT ] REGEXP operand
","
The right hand side of a condition.

The conditions ""IS [ NOT ]"" and ""IS [ NOT ] DISTINCT FROM"" are null-safe, meaning
NULL is considered the same as NULL, and the condition never evaluates to NULL.

When comparing with LIKE, the wildcards characters are ""_"" (any one character)
and ""%"" (any characters). The database uses an index when comparing with LIKE
except if the operand starts with a wildcard. To search for the characters ""%"" and
""_"", the characters need to be escaped. The default escape character is "" \ "" (backslash).
To select no escape character, use ""ESCAPE ''"" (empty string).
At most one escape character is allowed.
Each character that follows the escape character in the pattern needs to match exactly.
Patterns that end with an escape character are invalid and the expression returns NULL.

ILIKE does a case-insensitive compare.

When comparing with REGEXP, regular expression matching is used.
See Java ""Matcher.find"" for details.
","
LIKE 'Jo%'
"

"Other Grammar","Constraint","
[ constraintNameDefinition ]
{ CHECK expression
    | UNIQUE ( columnName [,...] )
    | referentialConstraint
    | PRIMARY KEY [ HASH ] ( columnName [,...] ) }
","
Defines a constraint.
The check condition must evaluate to TRUE, FALSE or NULL.
TRUE and NULL mean the operation is to be permitted,
and FALSE means the operation is to be rejected.
To prevent NULL in a column, use NOT NULL instead of a check constraint.
","
PRIMARY KEY(ID, NAME)
"

"Other Grammar","Constraint Name Definition","
CONSTRAINT [ IF NOT EXISTS ] newConstraintName
","
Defines a constraint name.
","
CONSTRAINT CONST_ID
"

"Other Grammar","Csv Options","
charsetString [, fieldSepString [, fieldDelimString [, escString [, nullString]]]]]
    | optionString
","
Optional parameters for CSVREAD and CSVWRITE.
Instead of setting the options one by one, all options can be
combined into a space separated key-value pairs, as follows:
""STRINGDECODE('charset=UTF-8 escape=\"" fieldDelimiter=\"" fieldSeparator=, ' ||""
""'lineComment=# lineSeparator=\n null= rowSeparator=')"".
The following options are supported:

""caseSensitiveColumnNames"" (true or false; disabled by default),

""charset"" (for example 'UTF-8'),

""escape"" (the character that escapes the field delimiter),

""fieldDelimiter"" (a double quote by default),

""fieldSeparator"" (a comma by default),

""lineComment"" (disabled by default),

""lineSeparator"" (the line separator used for writing; ignored for reading),

""null"", Support reading existing CSV files that contain explicit ""null"" delimiters.
Note that an empty, unquoted values are also treated as null.

""preserveWhitespace"" (true or false; disabled by default),

""writeColumnHeader"" (true or false; enabled by default).

For a newline or other special character, use STRINGDECODE as in the example above.
A space needs to be escaped with a backslash (""'\ '""), and
a backslash needs to be escaped with another backslash (""'\\'"").
All other characters are not to be escaped, that means
newline and tab characters are written as such.
","
CALL CSVWRITE('test2.csv', 'SELECT * FROM TEST', 'charset=UTF-8 fieldSeparator=|');
"

"Other Grammar","Data Type","
intType | booleanType | tinyintType | smallintType | bigintType | identityType
    | decimalType | doubleType | realType | dateType | timeType | timestampType
    | timestampWithTimeZoneType | binaryType | otherType | varcharType
    | varcharIgnorecaseType | charType | blobType | clobType | uuidType
    | arrayType | enumType | intervalType
","
A data type definition.
","
INT
"

"Other Grammar","Date","
DATE 'yyyy-MM-dd'
","
A date literal. The limitations are the same as for the Java data type
""java.sql.Date"", but for compatibility with other databases the suggested minimum
and maximum years are 0001 and 9999.
","
DATE '2004-12-31'
"

"Other Grammar","Decimal","
[ + | - ] { { number [ . number ] } | { . number } }
[ E [ + | - ] expNumber [...] ] ]
","
A decimal number with fixed precision and scale.
Internally, ""java.lang.BigDecimal"" is used.
To ensure the floating point representation is used, use CAST(X AS DOUBLE).
There are some special decimal values: to represent positive infinity, use ""POWER(0, -1)"";
for negative infinity, use ""(-POWER(0, -1))""; for -0.0, use ""(-CAST(0 AS DOUBLE))"";
for ""NaN"" (not a number), use ""SQRT(-1)"".
","
SELECT -1600.05
SELECT CAST(0 AS DOUBLE)
SELECT -1.4e-10
"

"Other Grammar","Delete search condition","
[ WHERE expression ] [ LIMIT term ]
","
Search condition for DELETE statement.
","
WHERE ID = 2
"

"Other Grammar","Digit","
0-9
","
A digit.
","
0
"

"Other Grammar","Dollar Quoted String","
$$anythingExceptTwoDollarSigns$$
","
A string starts and ends with two dollar signs. Two dollar signs are not allowed
within the text. A whitespace is required before the first set of dollar signs.
No escaping is required within the text.
","
$$John's car$$
"

"Other Grammar","Expression","
andCondition [ { OR andCondition } [...] ]
","
Value or condition.
","
ID=1 OR NAME='Hi'
"

"Other Grammar","Factor","
term [ { { * | / | % } term } [...] ]
","
A value or a numeric factor.
","
ID * 10
"

"Other Grammar","Hex","
{ { digit | a-f | A-F } { digit | a-f | A-F } } [...]
","
The hexadecimal representation of a number or of bytes. Two characters are one
byte.
","
cafe
"

"Other Grammar","Hex Number","
[ + | - ] 0x hex
","
A number written in hexadecimal notation.
","
0xff
"

"Other Grammar","Index Column","
columnName [ ASC | DESC ] [ NULLS { FIRST | LAST } ]
","
Indexes this column in ascending or descending order. Usually it is not required
to specify the order; however doing so will speed up large queries that order
the column in the same way.
","
NAME
"

"Other Grammar","Insert columns and source","
{ [ ( columnName [,...] ) ]
    { VALUES { ( { DEFAULT | expression } [,...] ) } [,...]
        | [ DIRECT ] [ SORTED ] select } } |
    { SET { columnName = { DEFAULT | expression } } [,...] }
","
Names of columns and their values for INSERT statement.
","
(ID, NAME) VALUES (1, 'Test')
"

"Other Grammar","Int","
[ + | - ] number
","
The maximum integer number is 2147483647, the minimum is -2147483648.
","
10
"

"Other Grammar","Long","
[ + | - ] number
","
Long numbers are between -9223372036854775808 and 9223372036854775807.
","
100000
"

"Other Grammar","Name","
{ { A-Z|_ } [ { A-Z|_|0-9 } [...] ] } | quotedName
","
Names are not case sensitive. There is no maximum name length.
","
TEST
"

"Other Grammar","Null","
NULL
","
NULL is a value without data type and means 'unknown value'.
","
NULL
"

"Other Grammar","Number","
digit [...]
","
The maximum length of the number depends on the data type used.
","
100
"

"Other Grammar","Numeric","
decimal | int | long | hexNumber
","
The data type of a numeric value is always the lowest possible for the given value.
If the number contains a dot this is decimal; otherwise it is int, long, or decimal (depending on the value).
","
SELECT -1600.05
SELECT CAST(0 AS DOUBLE)
SELECT -1.4e-10
"

"Other Grammar","Operand","
summand [ { || summand } [...] ]
","
A value or a concatenation of values.
In the default mode, the result is NULL if either parameter is NULL.
","
'Hi' || ' Eva'
"

"Other Grammar","Order","
{ int | expression } [ ASC | DESC ] [ NULLS { FIRST | LAST } ]
","
Sorts the result by the given column number, or by an expression. If the
expression is a single parameter, then the value is interpreted as a column
number. Negative column numbers reverse the sort order.
","
NAME DESC NULLS LAST
"

"Other Grammar","Quoted Name","
""anythingExceptDoubleQuote""
","
Quoted names are case sensitive, and can contain spaces. There is no maximum
name length. Two double quotes can be used to create a single double quote
inside an identifier.
","
""FirstName""
"

"Other Grammar","Referential Constraint","
FOREIGN KEY ( columnName [,...] )
REFERENCES [ refTableName ] [ ( refColumnName [,...] ) ]
[ ON DELETE referentialAction ] [ ON UPDATE referentialAction ]
","
Defines a referential constraint.
If the table name is not specified, then the same table is referenced.
RESTRICT is the default action.
If the referenced columns are not specified, then the primary key columns are used.
The required indexes are automatically created if required.
Some tables may not be referenced, such as metadata tables.
","
FOREIGN KEY(ID) REFERENCES TEST(ID)
"

"Other Grammar","Referential Action","
CASCADE | RESTRICT | NO ACTION | SET { DEFAULT | NULL }
","
The action CASCADE will cause conflicting rows in the referencing (child) table to be deleted or updated.
RESTRICT is the default action.
As this database does not support deferred checking, RESTRICT and NO ACTION will both throw an exception if the constraint is violated.
The action SET DEFAULT will set the column in the referencing (child) table to the default value, while SET NULL will set it to NULL.
","
FOREIGN KEY(ID) REFERENCES TEST(ID) ON UPDATE CASCADE
"

"Other Grammar","Script Compression Encryption","
[ COMPRESSION { DEFLATE | LZF | ZIP | GZIP } ]
[ CIPHER cipher PASSWORD string ]
","
The compression and encryption algorithm to use for script files.
When using encryption, only DEFLATE and LZF are supported.
LZF is faster but uses more space.
","
COMPRESSION LZF
"

"Other Grammar","Select Expression","
* | expression [ [ AS ] columnAlias ] | tableAlias.*
","
An expression in a SELECT statement.
","
ID AS VALUE
"

"Other Grammar","Set clause list","
{ { columnName = { DEFAULT | expression } } [,...] } |
    { ( columnName [,...] ) = ( select ) }
","
List of SET clauses.
","
NAME = 'Test', VALUE = 2
"

"Other Grammar","String","
'anythingExceptSingleQuote'
","
A string starts and ends with a single quote. Two single quotes can be used to
create a single quote inside a string.
","
'John''s car'
"

"Other Grammar","Summand","
factor [ { { + | - } factor } [...] ]
","
A value or a numeric sum.

Please note the text concatenation operator is ""||"".
","
ID + 20
"

"Other Grammar","Table Expression","
{ [ schemaName. ] tableName | ( select ) | valuesExpression }
[ [ AS ] newTableAlias [ ( columnName [,...] ) ] ]
[ USE INDEX ([ indexName [,...] ]) ]
[ { { LEFT | RIGHT } [ OUTER ] | [ INNER ] | CROSS | NATURAL }
    JOIN tableExpression [ ON expression ] ]
","
Joins a table. The join expression is not supported for cross and natural joins.
A natural join is an inner join, where the condition is automatically on the
columns with the same name.
","
TEST AS T LEFT JOIN TEST AS T1 ON T.ID = T1.ID
"

"Other Grammar","Values Expression","
VALUES { ( expression [,...] ) } [,...]
","
A list of rows that can be used like a table.
The column list of the resulting table is C1, C2, and so on.
","
SELECT * FROM (VALUES(1, 'Hello'), (2, 'World')) AS V;
"

"Other Grammar","Window specification","
([PARTITION BY expression [,...]] [ORDER BY order [,...]])
","
A window specification for a window function or aggregate.
Window functions are currently experimental in H2 and should be used with caution.
They also may require a lot of memory for large queries.
","
()
(ORDER BY ID)
(PARTITION BY CATEGORY)
(PARTITION BY CATEGORY ORDER BY NAME, ID)
"

"Other Grammar","Term","
value
    | columnName
    | ?[ int ]
    | NEXT VALUE FOR sequenceName
    | function
    | { - | + } term
    | ( expression )
    | select
    | case
    | caseWhen
    | tableAlias.columnName
    | userDefinedFunctionName
","
A value. Parameters can be indexed, for example ""?1"" meaning the first parameter.
Each table has a pseudo-column named ""_ROWID_"" that contains the unique row identifier.
","
'Hello'
"

"Other Grammar","Time","
TIME [ WITHOUT TIME ZONE ] 'hh:mm:ss[.nnnnnnnnn]'
","
A time literal. A value is between 0:00:00 and 23:59:59.999999999
and has nanosecond resolution.
","
TIME '23:59:59'
"

"Other Grammar","Timestamp","
TIMESTAMP [ WITHOUT TIME ZONE ] 'yyyy-MM-dd hh:mm:ss[.nnnnnnnnn]'
","
A timestamp literal. The limitations are the same as for the Java data type
""java.sql.Timestamp"", but for compatibility with other databases the suggested
minimum and maximum years are 0001 and 9999.
","
TIMESTAMP '2005-12-31 23:59:59'
"

"Other Grammar","Timestamp with time zone","
TIMESTAMP WITH TIME ZONE 'yyyy-MM-dd hh:mm:ss[.nnnnnnnnn]
[Z | { - | + } timeZoneOffsetString | timeZoneNameString ]'
","
A timestamp with time zone literal.
If name of time zone is specified it will be converted to time zone offset.
","
TIMESTAMP WITH TIME ZONE '2005-12-31 23:59:59Z'
TIMESTAMP WITH TIME ZONE '2005-12-31 23:59:59-10:00'
TIMESTAMP WITH TIME ZONE '2005-12-31 23:59:59.123+05'
TIMESTAMP WITH TIME ZONE '2005-12-31 23:59:59.123456789 Europe/London'
"

"Other Grammar","Date and time","
date | time | timestamp | timestampWithTimeZone
","
A literal value of any date-time data type.
","
TIMESTAMP '1999-01-31 10:00:00'
"

"Other Grammar","INTERVAL YEAR","
INTERVAL [-|+] '[-|+]yearInt' YEAR
","
An INTERVAL YEAR literal.
","
INTERVAL '10' YEAR
"

"Other Grammar","INTERVAL MONTH","
INTERVAL [-|+] '[-|+]monthInt' MONTH
","
An INTERVAL MONTH literal.
","
INTERVAL '10' MONTH
"

"Other Grammar","INTERVAL DAY","
INTERVAL [-|+] '[-|+]dayInt' DAY
","
An INTERVAL DAY literal.
","
INTERVAL '10' DAY
"

"Other Grammar","INTERVAL HOUR","
INTERVAL [-|+] '[-|+]hourInt' HOUR
","
An INTERVAL HOUR literal.
","
INTERVAL '10' HOUR
"

"Other Grammar","INTERVAL MINUTE","
INTERVAL [-|+] '[-|+]minuteInt' MINUTE
","
An INTERVAL MINUTE literal.
","
INTERVAL '10' MINUTE
"

"Other Grammar","INTERVAL SECOND","
INTERVAL [-|+] '[-|+]secondInt[.nnnnnnnnn]' SECOND
","
An INTERVAL SECOND literal.
","
INTERVAL '10.123' SECOND
"

"Other Grammar","INTERVAL YEAR TO MONTH","
INTERVAL [-|+] '[-|+]yearInt-monthInt' YEAR TO MONTH
","
An INTERVAL YEAR TO MONTH literal.
","
INTERVAL '1-6' YEAR TO MONTH
"

"Other Grammar","INTERVAL DAY TO HOUR","
INTERVAL [-|+] '[-|+]dayInt hoursInt' DAY TO HOUR
","
An INTERVAL DAY TO HOUR literal.
","
INTERVAL '10 11' DAY TO HOUR
"

"Other Grammar","INTERVAL DAY TO MINUTE","
INTERVAL [-|+] '[-|+]dayInt hh:mm' DAY TO MINUTE
","
An INTERVAL DAY TO MINUTE literal.
","
INTERVAL '10 11:12' DAY TO MINUTE
"

"Other Grammar","INTERVAL DAY TO SECOND","
INTERVAL [-|+] '[-|+]dayInt hh:mm:ss[.nnnnnnnnn]' DAY TO SECOND
","
An INTERVAL DAY TO SECOND literal.
","
INTERVAL '10 11:12:13.123' DAY TO SECOND
"

"Other Grammar","INTERVAL HOUR TO MINUTE","
INTERVAL [-|+] '[-|+]hh:mm' HOUR TO MINUTE
","
An INTERVAL HOUR TO MINUTE literal.
","
INTERVAL '10:11' HOUR TO MINUTE
"

"Other Grammar","INTERVAL HOUR TO SECOND","
INTERVAL [-|+] '[-|+]hh:mm:ss[.nnnnnnnnn]' HOUR TO SECOND
","
An INTERVAL HOUR TO SECOND literal.
","
INTERVAL '10:11:12.123' HOUR TO SECOND
"

"Other Grammar","INTERVAL MINUTE TO SECOND","
INTERVAL [-|+] '[-|+]mm:ss[.nnnnnnnnn]' MINUTE TO SECOND
","
An INTERVAL MINUTE TO SECOND literal.
","
INTERVAL '11:12.123' MINUTE TO SECOND
"

"Other Grammar","Interval","
intervalYear | intervalMonth | intervalDay | intervalHour | intervalMinute
| intervalSecond | intervalYearToMonth | intervalDayToHour
| intervalDayToMinute | intervalDayToSecond | intervalHourToMinute
| intervalHourToSecond | intervalMinuteToSecond
","
An interval literal.
","
INTERVAL '1-2' YEAR TO MONTH
"

"Other Grammar","Value","
string | dollarQuotedString | numeric | dateAndTime | boolean | bytes
| interval | array | null
","
A literal value of any data type, or null.
","
10
"

"Data Types","INT Type","
INT | INTEGER | MEDIUMINT | INT4 | SIGNED
","
Possible values: -2147483648 to 2147483647.

Mapped to ""java.lang.Integer"".
","
INT
"

"Data Types","BOOLEAN Type","
BOOLEAN | BIT | BOOL
","
Possible values: TRUE and FALSE.

Mapped to ""java.lang.Boolean"".
","
BOOLEAN
"

"Data Types","TINYINT Type","
TINYINT
","
Possible values are: -128 to 127.

Mapped to ""java.lang.Byte"".
","
TINYINT
"

"Data Types","SMALLINT Type","
SMALLINT | INT2 | YEAR
","
Possible values: -32768 to 32767.

Mapped to ""java.lang.Short"".
","
SMALLINT
"

"Data Types","BIGINT Type","
BIGINT | INT8
","
Possible values: -9223372036854775808 to 9223372036854775807.

Mapped to ""java.lang.Long"".
","
BIGINT
"

"Data Types","IDENTITY Type","
IDENTITY
","
Auto-Increment value. Possible values: -9223372036854775808 to
9223372036854775807. Used values are never re-used, even when the transaction is
rolled back.

Mapped to ""java.lang.Long"".
","
IDENTITY
"

"Data Types","DECIMAL Type","
{ DECIMAL | NUMBER | DEC | NUMERIC } ( precisionInt [ , scaleInt ] )
","
Data type with fixed precision and scale. This data type is recommended for
storing currency values.

Mapped to ""java.math.BigDecimal"".
","
DECIMAL(20, 2)
"

"Data Types","DOUBLE Type","
{ DOUBLE [ PRECISION ] | FLOAT [ ( precisionInt ) ] | FLOAT8 }
","
A floating point number. Should not be used to represent currency values, because
of rounding problems.
If precision value is specified for FLOAT type name, it should be from 25 to 53.

Mapped to ""java.lang.Double"".
","
DOUBLE
"

"Data Types","REAL Type","
{ REAL | FLOAT ( precisionInt ) | FLOAT4 }
","
A single precision floating point number. Should not be used to represent currency
values, because of rounding problems.
Precision value for FLOAT type name should be from 0 to 24.

Mapped to ""java.lang.Float"".
","
REAL
"

"Data Types","TIME Type","
TIME [ ( precisionInt ) ] [ WITHOUT TIME ZONE ]
","
The time data type. The format is hh:mm:ss[.nnnnnnnnn].
If fractional seconds precision is specified it should be from 0 to 9, 0 is default.

Mapped to ""java.sql.Time"". When converted to a ""java.sql.Date"", the date is set to ""1970-01-01"".
""java.time.LocalTime"" is also supported on Java 8 and later versions.
Resolution of ""java.sql.Time"" is limited to milliseconds, use ""String"" or ""java.time.LocalTime"" if you need nanosecond resolution.
","
TIME
"

"Data Types","DATE Type","
DATE
","
The date data type. The format is yyyy-MM-dd.

Mapped to ""java.sql.Date"", with the time set to ""00:00:00""
(or to the next possible time if midnight doesn't exist for the given date and timezone due to a daylight saving change).
""java.time.LocalDate"" is also supported on Java 8 and later versions.
","
DATE
"

"Data Types","TIMESTAMP Type","
{ TIMESTAMP [ ( precisionInt ) ] [ WITHOUT TIME ZONE ]
    | DATETIME [ ( precisionInt ) ] | SMALLDATETIME }
","
The timestamp data type. The format is yyyy-MM-dd hh:mm:ss[.nnnnnnnnn].
Stored internally as a BCD-encoded date, and nanoseconds since midnight.
If fractional seconds precision is specified it should be from 0 to 9, 6 is default.
Fractional seconds precision of SMALLDATETIME is always 0 and cannot be specified.

Mapped to ""java.sql.Timestamp"" (""java.util.Date"" may be used too).
""java.time.LocalDateTime"" is also supported on Java 8 and later versions.
","
TIMESTAMP
"

"Data Types","TIMESTAMP WITH TIME ZONE Type","
TIMESTAMP [ ( precisionInt ) ] WITH TIME ZONE
","
The timestamp with time zone data type.
Stored internally as a BCD-encoded date, nanoseconds since midnight, and time zone offset in minutes.
If fractional seconds precision is specified it should be from 0 to 9, 6 is default.

Mapped to ""org.h2.api.TimestampWithTimeZone"".
""java.time.OffsetDateTime"" and ""java.time.Instant"" are also supported on Java 8 and later versions.

Values of this data type are compared by UTC values. It means that ""2010-01-01 10:00:00+01"" is greater than ""2010-01-01 11:00:00+03"".

Conversion to ""TIMESTAMP"" uses time zone offset to get UTC time and converts it to local time using the system time zone.
Conversion from ""TIMESTAMP"" does the same operations in reverse and sets time zone offset to offset of the system time zone.
","
TIMESTAMP WITH TIME ZONE
"

"Data Types","BINARY Type","
{ BINARY | VARBINARY | BINARY VARYING
    | LONGVARBINARY | RAW | BYTEA }
[ ( precisionInt ) ]
","
Represents a byte array. For very long arrays, use BLOB.
The maximum size is 2 GB, but the whole object is kept in
memory when using this data type. The precision is a size constraint;
only the actual data is persisted. For large text data BLOB or CLOB
should be used.

Mapped to byte[].
","
BINARY(1000)
"

"Data Types","OTHER Type","
OTHER
","
This type allows storing serialized Java objects. Internally, a byte array is used.
Serialization and deserialization is done on the client side only.
Deserialization is only done when ""getObject"" is called.
Java operations cannot be executed inside the database engine for security reasons.
Use ""PreparedStatement.setObject"" to store values.

Mapped to ""java.lang.Object"" (or any subclass).
","
OTHER
"

"Data Types","VARCHAR Type","
{ VARCHAR | CHARACTER VARYING | LONGVARCHAR | VARCHAR2 | NVARCHAR
    | NVARCHAR2 | VARCHAR_CASESENSITIVE} [ ( precisionInt ) ]
","
A Unicode String.
Use two single quotes ('') to create a quote.

The maximum precision is ""Integer.MAX_VALUE"".
The precision is a size constraint; only the actual data is persisted.

The whole text is loaded into memory when using this data type.
For large text data CLOB should be used; see there for details.

Mapped to ""java.lang.String"".
","
VARCHAR(255)
"

"Data Types","VARCHAR_IGNORECASE Type","
VARCHAR_IGNORECASE [ ( precisionInt ) ]
","
Same as VARCHAR, but not case sensitive when comparing.
Stored in mixed case.

The maximum precision is ""Integer.MAX_VALUE"".
The precision is a size constraint; only the actual data is persisted.

The whole text is loaded into memory when using this data type.
For large text data CLOB should be used; see there for details.

Mapped to ""java.lang.String"".
","
VARCHAR_IGNORECASE
"

"Data Types","CHAR Type","
{ CHAR | CHARACTER | NCHAR } [ ( precisionInt ) ]
","
A Unicode String.
This type is supported for compatibility with other databases and older applications.
The difference to VARCHAR is that trailing spaces are ignored and not persisted.

The maximum precision is ""Integer.MAX_VALUE"".
The precision is a size constraint; only the actual data is persisted.

The whole text is kept in memory when using this data type.
For large text data CLOB should be used; see there for details.

Mapped to ""java.lang.String"".
","
CHAR(10)
"

"Data Types","BLOB Type","
{ BLOB | BINARY LARGE OBJECT
    | TINYBLOB | MEDIUMBLOB | LONGBLOB | IMAGE | OID }
[ ( precisionInt ) ]
","
Like BINARY, but intended for very large values such as files or images. Unlike
when using BINARY, large objects are not kept fully in-memory. Use
""PreparedStatement.setBinaryStream"" to store values. See also CLOB and
Advanced / Large Objects.

Mapped to ""java.sql.Blob"" (""java.io.InputStream"" is also supported).
","
BLOB
"

"Data Types","CLOB Type","
{ CLOB | CHARACTER LARGE OBJECT
    | TINYTEXT | TEXT | MEDIUMTEXT | LONGTEXT | NTEXT | NCLOB }
[ ( precisionInt ) ]
","
CLOB is like VARCHAR, but intended for very large values. Unlike when using
VARCHAR, large CLOB objects are not kept fully in-memory; instead, they are streamed.
CLOB should be used for documents and texts with arbitrary size such as XML or
HTML documents, text files, or memo fields of unlimited size. Use
""PreparedStatement.setCharacterStream"" to store values. See also Advanced / Large Objects.

VARCHAR should be used for text with relatively short average size (for example
shorter than 200 characters). Short CLOB values are stored inline, but there is
an overhead compared to VARCHAR.

Mapped to ""java.sql.Clob"" (""java.io.Reader"" is also supported).
","
CLOB
"

"Data Types","UUID Type","
UUID
","
Universally unique identifier. This is a 128 bit value.
To store values, use ""PreparedStatement.setBytes"",
""setString"", or ""setObject(uuid)"" (where ""uuid"" is a ""java.util.UUID"").
""ResultSet.getObject"" will return a ""java.util.UUID"".

Please note that using an index on randomly generated data will
result on poor performance once there are millions of rows in a table.
The reason is that the cache behavior is very bad with randomly distributed data.
This is a problem for any database system.

For details, see the documentation of ""java.util.UUID"".
","
UUID
"

"Data Types","ARRAY Type","
ARRAY
","
An array of values.
Mapped to ""java.lang.Object[]"" (arrays of any non-primitive type are also supported).


Use a value list (1, 2) or ""PreparedStatement.setObject(.., new Object[] {..})"" to store values,
and ""ResultSet.getObject(..)"" or ""ResultSet.getArray(..)"" to retrieve the values.
","
ARRAY
"

"Data Types","ENUM Type","
{ ENUM (string [, ... ]) }
","
A type with enumerated values.
Mapped to ""java.lang.Integer"".

The first provided value is mapped to 0, the
second mapped to 1, and so on.

Duplicate and empty values are not permitted.
","

ENUM('clubs', 'diamonds', 'hearts', 'spades')
"
"Data Types","GEOMETRY Type","
GEOMETRY
    [({ GEOMETRY |
    { POINT
    | LINESTRING
    | POLYGON
    | MULTIPOINT
    | MULTILINESTRING
    | MULTIPOLYGON
    | GEOMETRYCOLLECTION } [Z|M|ZM]}
    [, sridInt] )]
","
A spatial geometry type.
If additional constraints are not specified this type accepts all supported types of geometries.
A constraint with required geometry type and dimension system can be set by specifying name of the type and
dimension system. A whitespace between them is optional.
2D dimension system does not have a name and assumed if only a geometry type name is specified.
POINT means 2D point, POINT Z or POINTZ means 3D point.
GEOMETRY constraint means no restrictions on type or dimension system of geometry.
A constraint with required spatial reference system identifier (SRID) can be set by specifying this identifier.

Mapped to ""org.locationtech.jts.geom.Geometry"" if JTS library is in classpath and to ""java.lang.String"" otherwise.
May be represented in textual format using the WKT (well-known text) or EWKT (extended well-known text) format.
Values are stored internally in EWKB (extended well-known binary) format.
Only a subset of EWKB and EWKT features is supported.
Supported objects are POINT, LINESTRING, POLYGON, MULTIPOINT, MULTILINESTRING, MULTIPOLYGON, and GEOMETRYCOLLECTION.
Supported dimension systems are 2D (XY), Z (XYZ), M (XYM), and ZM (XYZM).
SRID (spatial reference system identifier) is supported.

Use a quoted string containing a WKT/EWKT formatted string or ""PreparedStatement.setObject()"" to store values,
and ""ResultSet.getObject(..)"" or ""ResultSet.getString(..)"" to retrieve the values.
","
GEOMETRY
GEOMETRY(POINT)
GEOMETRY(POINT Z)
GEOMETRY(POINT Z, 4326)
GEOMETRY(GEOMETRY, 4326)
"

"Data Types","INTERVAL Type","
intervalYearType | intervalMonthType | intervalDayType
    | intervalHourType| intervalMinuteType | intervalSecondType
    | intervalYearToMonthType | intervalDayToHourType
    | intervalDayToMinuteType | intervalDayToSecondType
    | intervalHourToMinuteType | intervalHourToSecondType
    | intervalMinuteToSecondType
","
Interval data type.
There are two classes of intervals. Year-month intervals can store years and months.
Day-time intervals can store days, hours, minutes, and seconds.
Year-month intervals are comparable only with another year-month intervals.
Day-time intervals are comparable only with another day-time intervals.

Mapped to ""org.h2.api.Interval"".
","
INTERVAL DAY TO SECOND
"

"Interval Data Types","INTERVAL YEAR Type","
INTERVAL YEAR [ ( precisionInt ) ]
","
Interval data type.
If precision is specified it should be from 1 to 18, 2 is default.

Mapped to ""org.h2.api.Interval"".
","
INTERVAL YEAR
"

"Interval Data Types","INTERVAL MONTH Type","
INTERVAL MONTH [ ( precisionInt ) ]
","
Interval data type.
If precision is specified it should be from 1 to 18, 2 is default.

Mapped to ""org.h2.api.Interval"".
","
INTERVAL MONTH
"

"Interval Data Types","INTERVAL DAY Type","
INTERVAL DAY [ ( precisionInt ) ]
","
Interval data type.
If precision is specified it should be from 1 to 18, 2 is default.

Mapped to ""org.h2.api.Interval"".
""java.time.Duration"" is also supported on Java 8 and later versions.
","
INTERVAL DAY
"

"Interval Data Types","INTERVAL HOUR Type","
INTERVAL HOUR [ ( precisionInt ) ]
","
Interval data type.
If precision is specified it should be from 1 to 18, 2 is default.

Mapped to ""org.h2.api.Interval"".
""java.time.Duration"" is also supported on Java 8 and later versions.
","
INTERVAL HOUR
"

"Interval Data Types","INTERVAL MINUTE Type","
INTERVAL MINUTE [ ( precisionInt ) ]
","
Interval data type.
If precision is specified it should be from 1 to 18, 2 is default.

Mapped to ""org.h2.api.Interval"".
""java.time.Duration"" is also supported on Java 8 and later versions.
","
INTERVAL MINUTE
"

"Interval Data Types","INTERVAL SECOND Type","
INTERVAL SECOND [ ( precisionInt [, fractionalPrecisionInt ] ) ]
","
Interval data type.
If precision is specified it should be from 1 to 18, 2 is default.
If fractional seconds precision is specified it should be from 0 to 9, 6 is default.

Mapped to ""org.h2.api.Interval"".
""java.time.Duration"" is also supported on Java 8 and later versions.
","
INTERVAL SECOND
"

"Interval Data Types","INTERVAL YEAR TO MONTH Type","
INTERVAL YEAR [ ( precisionInt ) ] TO MONTH
","
Interval data type.
If leading field precision is specified it should be from 1 to 18, 2 is default.

Mapped to ""org.h2.api.Interval"".
","
INTERVAL YEAR TO MONTH
"

"Interval Data Types","INTERVAL DAY TO HOUR Type","
INTERVAL DAY [ ( precisionInt ) ] TO HOUR
","
Interval data type.
If leading field precision is specified it should be from 1 to 18, 2 is default.

Mapped to ""org.h2.api.Interval"".
""java.time.Duration"" is also supported on Java 8 and later versions.
","
INTERVAL DAY TO HOUR
"

"Interval Data Types","INTERVAL DAY TO MINUTE Type","
INTERVAL DAY [ ( precisionInt ) ] TO MINUTE
","
Interval data type.
If leading field precision is specified it should be from 1 to 18, 2 is default.

Mapped to ""org.h2.api.Interval"".
""java.time.Duration"" is also supported on Java 8 and later versions.
","
INTERVAL DAY TO MINUTE
"

"Interval Data Types","INTERVAL DAY TO SECOND Type","
INTERVAL DAY [ ( precisionInt ) ] TO SECOND [ ( fractionalPrecisionInt ) ]
","
Interval data type.
If leading field precision is specified it should be from 1 to 18, 2 is default.
If fractional seconds precision is specified it should be from 0 to 9, 6 is default.

Mapped to ""org.h2.api.Interval"".
""java.time.Duration"" is also supported on Java 8 and later versions.
","
INTERVAL DAY TO SECOND
"

"Interval Data Types","INTERVAL HOUR TO MINUTE Type","
INTERVAL HOUR [ ( precisionInt ) ] TO MINUTE
","
Interval data type.
If leading field precision is specified it should be from 1 to 18, 2 is default.

Mapped to ""org.h2.api.Interval"".
""java.time.Duration"" is also supported on Java 8 and later versions.
","
INTERVAL HOUR TO MINUTE
"

"Interval Data Types","INTERVAL HOUR TO SECOND Type","
INTERVAL HOUR [ ( precisionInt ) ] TO SECOND [ ( fractionalPrecisionInt ) ]
","
Interval data type.
If leading field precision is specified it should be from 1 to 18, 2 is default.
If fractional seconds precision is specified it should be from 0 to 9, 6 is default.

Mapped to ""org.h2.api.Interval"".
""java.time.Duration"" is also supported on Java 8 and later versions.
","
INTERVAL HOUR TO SECOND
"

"Interval Data Types","INTERVAL MINUTE TO SECOND Type","
INTERVAL MINUTE [ ( precisionInt ) ] TO SECOND [ ( fractionalPrecisionInt ) ]
","
Interval data type.
If leading field precision is specified it should be from 1 to 18, 2 is default.
If fractional seconds precision is specified it should be from 0 to 9, 6 is default.

Mapped to ""org.h2.api.Interval"".
""java.time.Duration"" is also supported on Java 8 and later versions.
","
INTERVAL MINUTE TO SECOND
"

"Functions (Aggregate)","AVG","
AVG ( [ DISTINCT ] { numeric } )
[FILTER (WHERE expression)] [OVER windowSpecification]
","
The average (mean) value.
If no rows are selected, the result is NULL.
Aggregates are only allowed in select statements.
The returned value is of the same data type as the parameter.
","
AVG(X)
"

"Functions (Aggregate)","BIT_AND","
BIT_AND(expression)
[FILTER (WHERE expression)] [OVER windowSpecification]
","
The bitwise AND of all non-null values.
If no rows are selected, the result is NULL.
Aggregates are only allowed in select statements.
","
BIT_AND(ID)
"

"Functions (Aggregate)","BIT_OR","
BIT_OR(expression)
[FILTER (WHERE expression)] [OVER windowSpecification]
","
The bitwise OR of all non-null values.
If no rows are selected, the result is NULL.
Aggregates are only allowed in select statements.
","
BIT_OR(ID)
"

"Functions (Aggregate)","BOOL_AND","
BOOL_AND(boolean)
[FILTER (WHERE expression)] [OVER windowSpecification]
","
Returns true if all expressions are true.
If no rows are selected, the result is NULL.
Aggregates are only allowed in select statements.
","
BOOL_AND(ID>10)
"

"Functions (Aggregate)","BOOL_OR","
BOOL_OR(boolean)
[FILTER (WHERE expression)] [OVER windowSpecification]
","
Returns true if any expression is true.
If no rows are selected, the result is NULL.
Aggregates are only allowed in select statements.
","
BOOL_OR(NAME LIKE 'W%')
"

"Functions (Aggregate)","COUNT","
COUNT( { * | { [ DISTINCT ] expression } } )
[FILTER (WHERE expression)] [OVER windowSpecification]
","
The count of all row, or of the non-null values.
This method returns a long.
If no rows are selected, the result is 0.
Aggregates are only allowed in select statements.
","
COUNT(*)
"

"Functions (Aggregate)","GROUP_CONCAT","
GROUP_CONCAT ( [ DISTINCT ] string
[ ORDER BY { expression [ ASC | DESC ] } [,...] ]
[ SEPARATOR expression ] )
[FILTER (WHERE expression)] [OVER windowSpecification]
","
Concatenates strings with a separator.
The default separator is a ',' (without space).
This method returns a string.
If no rows are selected, the result is NULL.
Aggregates are only allowed in select statements.
","
GROUP_CONCAT(NAME ORDER BY ID SEPARATOR ', ')
"

"Functions (Aggregate)","ARRAY_AGG","
ARRAY_AGG ( [ DISTINCT ] string
[ ORDER BY { expression [ ASC | DESC ] } [,...] ] )
[FILTER (WHERE expression)] [OVER windowSpecification]
","
Aggregate the value into an array.
This method returns an array.
If no rows are selected, the result is NULL.
Aggregates are only allowed in select statements.
","
ARRAY_AGG(NAME ORDER BY ID)
"

"Functions (Aggregate)","MAX","
MAX(value)
[FILTER (WHERE expression)] [OVER windowSpecification]
","
The highest value.
If no rows are selected, the result is NULL.
Aggregates are only allowed in select statements.
The returned value is of the same data type as the parameter.
","
MAX(NAME)
"

"Functions (Aggregate)","MIN","
MIN(value)
[FILTER (WHERE expression)] [OVER windowSpecification]
","
The lowest value.
If no rows are selected, the result is NULL.
Aggregates are only allowed in select statements.
The returned value is of the same data type as the parameter.
","
MIN(NAME)
"

"Functions (Aggregate)","SUM","
SUM( [ DISTINCT ] { numeric } )
[FILTER (WHERE expression)] [OVER windowSpecification]
","
The sum of all values.
If no rows are selected, the result is NULL.
Aggregates are only allowed in select statements.
The data type of the returned value depends on the parameter data type like this:
""BOOLEAN, TINYINT, SMALLINT, INT -> BIGINT, BIGINT -> DECIMAL, REAL -> DOUBLE""
","
SUM(X)
"

"Functions (Aggregate)","SELECTIVITY","
SELECTIVITY(value)
[FILTER (WHERE expression)] [OVER windowSpecification]
","
Estimates the selectivity (0-100) of a value.
The value is defined as (100 * distinctCount / rowCount).
The selectivity of 0 rows is 0 (unknown).
Up to 10000 values are kept in memory.
Aggregates are only allowed in select statements.
","
SELECT SELECTIVITY(FIRSTNAME), SELECTIVITY(NAME) FROM TEST WHERE ROWNUM()<20000
"

"Functions (Aggregate)","STDDEV_POP","
STDDEV_POP( [ DISTINCT ] numeric )
[FILTER (WHERE expression)] [OVER windowSpecification]
","
The population standard deviation.
This method returns a double.
If no rows are selected, the result is NULL.
Aggregates are only allowed in select statements.
","
STDDEV_POP(X)
"

"Functions (Aggregate)","STDDEV_SAMP","
STDDEV_SAMP( [ DISTINCT ] numeric )
[FILTER (WHERE expression)] [OVER windowSpecification]
","
The sample standard deviation.
This method returns a double.
If no rows are selected, the result is NULL.
Aggregates are only allowed in select statements.
","
STDDEV(X)
"

"Functions (Aggregate)","VAR_POP","
VAR_POP( [ DISTINCT ] numeric )
[FILTER (WHERE expression)] [OVER windowSpecification]
","
The population variance (square of the population standard deviation).
This method returns a double.
If no rows are selected, the result is NULL.
Aggregates are only allowed in select statements.
","
VAR_POP(X)
"

"Functions (Aggregate)","VAR_SAMP","
VAR_SAMP( [ DISTINCT ] numeric )
[FILTER (WHERE expression)] [OVER windowSpecification]
","
The sample variance (square of the sample standard deviation).
This method returns a double.
If no rows are selected, the result is NULL.
Aggregates are only allowed in select statements.
","
VAR_SAMP(X)
"

"Functions (Aggregate)","MEDIAN","
MEDIAN( [ DISTINCT ] value )
[FILTER (WHERE expression)] [OVER windowSpecification]
","
The value separating the higher half of a values from the lower half.
Returns the middle value or an interpolated value between two middle values if number of values is even.
Interpolation is only supported for numeric, date-time, and interval data types.
NULL values are ignored in the calculation.
If no rows are selected, the result is NULL.
Aggregates are only allowed in select statements.
","
MEDIAN(X)
"

"Functions (Aggregate)","MODE","
{ MODE( value ) [ ORDER BY expression [ ASC | DESC ] ] }
    | { MODE() WITHIN GROUP(ORDER BY expression [ ASC | DESC ]) }
[FILTER (WHERE expression)] [OVER windowSpecification]
","
Returns the value that occurs with the greatest frequency.
If there are multiple values with the same frequency only one value will be returned.
In this situation value will be chosen based on optional ORDER BY clause
that should specify exactly the same expression as argument of this function.
Use ascending order to get smallest value or descending order to get largest value
from multiple values with the same frequency.
If this clause is not specified the exact chosen value is not determined in this situation.
NULL values are ignored in the calculation.
If no rows are selected, the result is NULL.
Aggregates are only allowed in select statements.
","
MODE(X)
MODE(X ORDER BY X)
MODE() WITHIN GROUP(ORDER BY X)
"

"Functions (Aggregate)","ENVELOPE","
ENVELOPE( value )
[FILTER (WHERE expression)] [OVER windowSpecification]
","
Returns the minimum bounding box that encloses all specified GEOMETRY values.
Only 2D coordinate plane is supported.
NULL values are ignored in the calculation.
If no rows are selected, the result is NULL.
Aggregates are only allowed in select statements.
","
ENVELOPE(X)
"

"Functions (Numeric)","ABS","
ABS ( { numeric } )
","
See also Java ""Math.abs"".
Please note that ""Math.abs(Integer.MIN_VALUE) == Integer.MIN_VALUE"" and ""Math.abs(Long.MIN_VALUE) == Long.MIN_VALUE"".
The returned value is of the same data type as the parameter.
","
ABS(ID)
"

"Functions (Numeric)","ACOS","
ACOS(numeric)
","
Calculate the arc cosine.
See also Java ""Math.acos"".
This method returns a double.
","
ACOS(D)
"

"Functions (Numeric)","ASIN","
ASIN(numeric)
","
Calculate the arc sine.
See also Java ""Math.asin"".
This method returns a double.
","
ASIN(D)
"

"Functions (Numeric)","ATAN","
ATAN(numeric)
","
Calculate the arc tangent.
See also Java ""Math.atan"".
This method returns a double.
","
ATAN(D)
"

"Functions (Numeric)","COS","
COS(numeric)
","
Calculate the trigonometric cosine.
See also Java ""Math.cos"".
This method returns a double.
","
COS(ANGLE)
"

"Functions (Numeric)","COSH","
COSH(numeric)
","
Calculate the hyperbolic cosine.
See also Java ""Math.cosh"".
This method returns a double.
","
COSH(X)
"

"Functions (Numeric)","COT","
COT(numeric)
","
Calculate the trigonometric cotangent (""1/TAN(ANGLE)"").
See also Java ""Math.*"" functions.
This method returns a double.
","
COT(ANGLE)
"

"Functions (Numeric)","SIN","
SIN(numeric)
","
Calculate the trigonometric sine.
See also Java ""Math.sin"".
This method returns a double.
","
SIN(ANGLE)
"

"Functions (Numeric)","SINH","
SINH(numeric)
","
Calculate the hyperbolic sine.
See also Java ""Math.sinh"".
This method returns a double.
","
SINH(ANGLE)
"

"Functions (Numeric)","TAN","
TAN(numeric)
","
Calculate the trigonometric tangent.
See also Java ""Math.tan"".
This method returns a double.
","
TAN(ANGLE)
"

"Functions (Numeric)","TANH","
TANH(numeric)
","
Calculate the hyperbolic tangent.
See also Java ""Math.tanh"".
This method returns a double.
","
TANH(X)
"

"Functions (Numeric)","ATAN2","
ATAN2(numeric, numeric)
","
Calculate the angle when converting the rectangular coordinates to polar coordinates.
See also Java ""Math.atan2"".
This method returns a double.
","
ATAN2(X, Y)
"

"Functions (Numeric)","BITAND","
BITAND(long, long)
","
The bitwise AND operation.
This method returns a long.
See also Java operator &.
","
BITAND(A, B)
"

"Functions (Numeric)","BITGET","
BITGET(long, int)
","
Returns true if and only if the first parameter has a bit set in the
position specified by the second parameter.
This method returns a boolean.
The second parameter is zero-indexed; the least significant bit has position 0.
","
BITGET(A, 1)
"

"Functions (Numeric)","BITOR","
BITOR(long, long)
","
The bitwise OR operation.
This method returns a long.
See also Java operator |.
","
BITOR(A, B)
"

"Functions (Numeric)","BITXOR","
BITXOR(long, long)
","
The bitwise XOR operation.
This method returns a long.
See also Java operator ^.
","
BITXOR(A, B)
"

"Functions (Numeric)","MOD","
MOD(long, long)
","
The modulo operation.
This method returns a long.
See also Java operator %.
","
MOD(A, B)
"

"Functions (Numeric)","CEILING","
{ CEILING | CEIL } (numeric)
","
See also Java ""Math.ceil"".
This method returns a double.
","
CEIL(A)
"

"Functions (Numeric)","DEGREES","
DEGREES(numeric)
","
See also Java ""Math.toDegrees"".
This method returns a double.
","
DEGREES(A)
"

"Functions (Numeric)","EXP","
EXP(numeric)
","
See also Java ""Math.exp"".
This method returns a double.
","
EXP(A)
"

"Functions (Numeric)","FLOOR","
FLOOR(numeric)
","
See also Java ""Math.floor"".
This method returns a double.
","
FLOOR(A)
"

"Functions (Numeric)","LOG","
{ LOG | LN } (numeric)
","
See also Java ""Math.log"".
In the PostgreSQL mode, LOG(x) is base 10.
This method returns a double.
","
LOG(A)
"

"Functions (Numeric)","LOG10","
LOG10(numeric)
","
See also Java ""Math.log10"".
This method returns a double.
","
LOG10(A)
"

"Functions (Numeric)","ORA_HASH","
ORA_HASH(expression [, bucketLong [, seedLong]])
","
Computes a hash value.
Optional bucket argument determines the maximum returned value.
This argument should be between 0 and 4294967295, default is 4294967295.
Optional seed argument is combined with the given expression to return the different values for the same expression.
This argument should be between 0 and 4294967295, default is 0.
This method returns a long value between 0 and the specified or default bucket value inclusive.
","
ORA_HASH(A)
"

"Functions (Numeric)","RADIANS","
RADIANS(numeric)
","
See also Java ""Math.toRadians"".
This method returns a double.
","
RADIANS(A)
"

"Functions (Numeric)","SQRT","
SQRT(numeric)
","
See also Java ""Math.sqrt"".
This method returns a double.
","
SQRT(A)
"

"Functions (Numeric)","PI","
PI()
","
See also Java ""Math.PI"".
This method returns a double.
","
PI()
"

"Functions (Numeric)","POWER","
POWER(numeric, numeric)
","
See also Java ""Math.pow"".
This method returns a double.
","
POWER(A, B)
"

"Functions (Numeric)","RAND","
{ RAND | RANDOM } ( [ int ] )
","
Calling the function without parameter returns the next a pseudo random number.
Calling it with an parameter seeds the session's random number generator.
This method returns a double between 0 (including) and 1 (excluding).
","
RAND()
"

"Functions (Numeric)","RANDOM_UUID","
{ RANDOM_UUID | UUID } ()
","
Returns a new UUID with 122 pseudo random bits.

Please note that using an index on randomly generated data will
result on poor performance once there are millions of rows in a table.
The reason is that the cache behavior is very bad with randomly distributed data.
This is a problem for any database system.
","
RANDOM_UUID()
"

"Functions (Numeric)","ROUND","
ROUND(numeric [, digitsInt])
","
Rounds to a number of digits, or to the nearest long if the number of digits if not set.
This method returns a numeric (the same type as the input).
","
ROUND(VALUE, 2)
"

"Functions (Numeric)","ROUNDMAGIC","
ROUNDMAGIC(numeric)
","
This function rounds numbers in a good way, but it is slow.
It has a special handling for numbers around 0.
Only numbers smaller or equal +/-1000000000000 are supported.
The value is converted to a String internally, and then the last last 4 characters are checked.
'000x' becomes '0000' and '999x' becomes '999999', which is rounded automatically.
This method returns a double.
","
ROUNDMAGIC(VALUE/3*3)
"

"Functions (Numeric)","SECURE_RAND","
SECURE_RAND(int)
","
Generates a number of cryptographically secure random numbers.
This method returns bytes.
","
CALL SECURE_RAND(16)
"

"Functions (Numeric)","SIGN","
SIGN ( { numeric } )
","
Returns -1 if the value is smaller 0, 0 if zero, and otherwise 1.
","
SIGN(VALUE)
"

"Functions (Numeric)","ENCRYPT","
ENCRYPT(algorithmString, keyBytes, dataBytes)
","
Encrypts data using a key.
The supported algorithm is AES.
The block size is 16 bytes.
This method returns bytes.
","
CALL ENCRYPT('AES', '00', STRINGTOUTF8('Test'))
"

"Functions (Numeric)","DECRYPT","
DECRYPT(algorithmString, keyBytes, dataBytes)
","
Decrypts data using a key.
The supported algorithm is AES.
The block size is 16 bytes.
This method returns bytes.
","
CALL TRIM(CHAR(0) FROM UTF8TOSTRING(
    DECRYPT('AES', '00', '3fabb4de8f1ee2e97d7793bab2db1116')))
"

"Functions (Numeric)","HASH","
HASH(algorithmString, expression [, iterationInt])
","
Calculate the hash value using an algorithm, and repeat this process for a number of iterations.
Currently, the only algorithm supported is SHA256.
This method returns bytes.
","
CALL HASH('SHA256', STRINGTOUTF8('Password'), 1000)
"

"Functions (Numeric)","TRUNCATE","
{ TRUNC | TRUNCATE } ( { {numeric, digitsInt}
    | timestamp | timestampWithTimeZone | date | timestampString } )
","
Truncates to a number of digits (to the next value closer to 0).
This method returns a double.
When used with a timestamp, truncates a timestamp to a date (day) value.
When used with a date, truncates a date to a date (day) value less time part.
When used with a timestamp as string, truncates a timestamp to a date (day) value.
","
TRUNCATE(VALUE, 2)
"

"Functions (Numeric)","COMPRESS","
COMPRESS(dataBytes [, algorithmString])
","
Compresses the data using the specified compression algorithm.
Supported algorithms are: LZF (faster but lower compression; default), and DEFLATE (higher compression).
Compression does not always reduce size. Very small objects and objects with little redundancy may get larger.
This method returns bytes.
","
COMPRESS(STRINGTOUTF8('Test'))
"

"Functions (Numeric)","EXPAND","
EXPAND(bytes)
","
Expands data that was compressed using the COMPRESS function.
This method returns bytes.
","
UTF8TOSTRING(EXPAND(COMPRESS(STRINGTOUTF8('Test'))))
"

"Functions (Numeric)","ZERO","
ZERO()
","
Returns the value 0. This function can be used even if numeric literals are disabled.
","
ZERO()
"

"Functions (String)","ASCII","
ASCII(string)
","
Returns the ASCII value of the first character in the string.
This method returns an int.
","
ASCII('Hi')
"
"Functions (String)","BIT_LENGTH","
BIT_LENGTH(string)
","
Returns the number of bits in a string.
This method returns a long.
For BLOB, CLOB, BYTES and JAVA_OBJECT, the precision is used. Each character needs 16 bits.
","
BIT_LENGTH(NAME)
"

"Functions (String)","LENGTH","
{ LENGTH | CHAR_LENGTH | CHARACTER_LENGTH } ( string )
","
Returns the number of characters in a string.
This method returns a long.
For BLOB, CLOB, BYTES and JAVA_OBJECT, the precision is used.
","
LENGTH(NAME)
"

"Functions (String)","OCTET_LENGTH","
OCTET_LENGTH(string)
","
Returns the number of bytes in a string.
This method returns a long.
For BLOB, CLOB, BYTES and JAVA_OBJECT, the precision is used.
Each character needs 2 bytes.
","
OCTET_LENGTH(NAME)
"

"Functions (String)","CHAR","
{ CHAR | CHR } ( int )
","
Returns the character that represents the ASCII value.
This method returns a string.
","
CHAR(65)
"

"Functions (String)","CONCAT","
CONCAT(string, string [,...])
","
Combines strings.
Unlike with the operator ""||"", NULL parameters are ignored,
and do not cause the result to become NULL.
This method returns a string.
","
CONCAT(NAME, '!')
"

"Functions (String)","CONCAT_WS","
CONCAT_WS(separatorString, string, string [,...])
","
Combines strings with separator.
Unlike with the operator ""||"", NULL parameters are ignored,
and do not cause the result to become NULL.
This method returns a string.
","
CONCAT_WS(',', NAME, '!')
"

"Functions (String)","DIFFERENCE","
DIFFERENCE(string, string)
","
Returns the difference between the sounds of two strings.
This method returns an int.
","
DIFFERENCE(T1.NAME, T2.NAME)
"

"Functions (String)","HEXTORAW","
HEXTORAW(string)
","
Converts a hex representation of a string to a string.
4 hex characters per string character are used.
","
HEXTORAW(DATA)
"

"Functions (String)","RAWTOHEX","
RAWTOHEX(string)
","
Converts a string to the hex representation.
4 hex characters per string character are used.
This method returns a string.
","
RAWTOHEX(DATA)
"

"Functions (String)","INSTR","
INSTR(string, searchString, [, startInt])
","
Returns the location of a search string in a string.
If a start position is used, the characters before it are ignored.
If position is negative, the rightmost location is returned.
0 is returned if the search string is not found.
Please note this function is case sensitive, even if the parameters are not.
","
INSTR(EMAIL,'@')
"

"Functions (String)","INSERT Function","
INSERT(originalString, startInt, lengthInt, addString)
","
Inserts a additional string into the original string at a specified start position.
The length specifies the number of characters that are removed at the start position in the original string.
This method returns a string.
","
INSERT(NAME, 1, 1, ' ')
"

"Functions (String)","LOWER","
{ LOWER | LCASE } ( string )
","
Converts a string to lowercase.
","
LOWER(NAME)
"

"Functions (String)","UPPER","
{ UPPER | UCASE } ( string )
","
Converts a string to uppercase.
","
UPPER(NAME)
"

"Functions (String)","LEFT","
LEFT(string, int)
","
Returns the leftmost number of characters.
","
LEFT(NAME, 3)
"

"Functions (String)","RIGHT","
RIGHT(string, int)
","
Returns the rightmost number of characters.
","
RIGHT(NAME, 3)
"

"Functions (String)","LOCATE","
LOCATE(searchString, string [, startInt])
","
Returns the location of a search string in a string.
If a start position is used, the characters before it are ignored.
If position is negative, the rightmost location is returned.
0 is returned if the search string is not found.
","
LOCATE('.', NAME)
"

"Functions (String)","POSITION","
POSITION(searchString, string)
","
Returns the location of a search string in a string. See also LOCATE.
","
POSITION('.', NAME)
"

"Functions (String)","LPAD","
LPAD(string, int[, paddingString])
","
Left pad the string to the specified length.
If the length is shorter than the string, it will be truncated at the end.
If the padding string is not set, spaces will be used.
","
LPAD(AMOUNT, 10, '*')
"

"Functions (String)","RPAD","
RPAD(string, int[, paddingString])
","
Right pad the string to the specified length.
If the length is shorter than the string, it will be truncated.
If the padding string is not set, spaces will be used.
","
RPAD(TEXT, 10, '-')
"

"Functions (String)","LTRIM","
LTRIM(string)
","
Removes all leading spaces from a string.
","
LTRIM(NAME)
"

"Functions (String)","RTRIM","
RTRIM(string)
","
Removes all trailing spaces from a string.
","
RTRIM(NAME)
"

"Functions (String)","TRIM","
TRIM ( [ { LEADING | TRAILING | BOTH } [ string ] FROM ] string )
","
Removes all leading spaces, trailing spaces, or spaces at both ends, from a string.
Other characters can be removed as well.
","
TRIM(BOTH '_' FROM NAME)
"

"Functions (String)","REGEXP_REPLACE","
REGEXP_REPLACE(inputString, regexString, replacementString [, flagsString])
","
Replaces each substring that matches a regular expression.
For details, see the Java ""String.replaceAll()"" method.
If any parameter is null (except optional flagsString parameter), the result is null.

Flags values limited to 'i', 'c', 'n', 'm'. Other symbols causes exception.
Multiple symbols could be uses in one flagsString parameter (like 'im').
Later flags overrides first ones, for example 'ic' equivalent to case sensitive matching 'c'.

'i' enables case insensitive matching (Pattern.CASE_INSENSITIVE)

'c' disables case insensitive matching (Pattern.CASE_INSENSITIVE)

'n' allows the period to match the newline character (Pattern.DOTALL)

'm' enables multiline mode (Pattern.MULTILINE)

","
REGEXP_REPLACE('Hello    World', ' +', ' ')
REGEXP_REPLACE('Hello WWWWorld', 'w+', 'W', 'i')
"

"Functions (String)","REGEXP_LIKE","
REGEXP_LIKE(inputString, regexString [, flagsString])
","
Matches string to a regular expression.
For details, see the Java ""Matcher.find()"" method.
If any parameter is null (except optional flagsString parameter), the result is null.

Flags values limited to 'i', 'c', 'n', 'm'. Other symbols causes exception.
Multiple symbols could be uses in one flagsString parameter (like 'im').
Later flags overrides first ones, for example 'ic' equivalent to case sensitive matching 'c'.

'i' enables case insensitive matching (Pattern.CASE_INSENSITIVE)

'c' disables case insensitive matching (Pattern.CASE_INSENSITIVE)

'n' allows the period to match the newline character (Pattern.DOTALL)

'm' enables multiline mode (Pattern.MULTILINE)

","
REGEXP_LIKE('Hello    World', '[A-Z ]*', 'i')
"


"Functions (String)","REPEAT","
REPEAT(string, int)
","
Returns a string repeated some number of times.
","
REPEAT(NAME || ' ', 10)
"

"Functions (String)","REPLACE","
REPLACE(string, searchString [, replacementString])
","
Replaces all occurrences of a search string in a text with another string.
If no replacement is specified, the search string is removed from the original string.
If any parameter is null, the result is null.
","
REPLACE(NAME, ' ')
"

"Functions (String)","SOUNDEX","
SOUNDEX(string)
","
Returns a four character code representing the sound of a string.
See also http://www.archives.gov/genealogy/census/soundex.html .
This method returns a string.
","
SOUNDEX(NAME)
"

"Functions (String)","SPACE","
SPACE(int)
","
Returns a string consisting of a number of spaces.
","
SPACE(80)
"

"Functions (String)","STRINGDECODE","
STRINGDECODE(string)
","
Converts a encoded string using the Java string literal encoding format.
Special characters are \b, \t, \n, \f, \r, \"", \\, \<octal>, \u<unicode>.
This method returns a string.
","
CALL STRINGENCODE(STRINGDECODE('Lines 1\nLine 2'))
"

"Functions (String)","STRINGENCODE","
STRINGENCODE(string)
","
Encodes special characters in a string using the Java string literal encoding format.
Special characters are \b, \t, \n, \f, \r, \"", \\, \<octal>, \u<unicode>.
This method returns a string.
","
CALL STRINGENCODE(STRINGDECODE('Lines 1\nLine 2'))
"

"Functions (String)","STRINGTOUTF8","
STRINGTOUTF8(string)
","
Encodes a string to a byte array using the UTF8 encoding format.
This method returns bytes.
","
CALL UTF8TOSTRING(STRINGTOUTF8('This is a test'))
"

"Functions (String)","SUBSTRING","
{ SUBSTRING | SUBSTR } ( string, startInt [, lengthInt ] )
","
Returns a substring of a string starting at a position.
If the start index is negative, then the start index is relative to the end of the string.
The length is optional.
Also supported is: ""SUBSTRING(string [FROM start] [FOR length])"".
","
CALL SUBSTR('[Hello]', 2, 5);
CALL SUBSTR('Hello World', -5);
"

"Functions (String)","UTF8TOSTRING","
UTF8TOSTRING(bytes)
","
Decodes a byte array in the UTF8 format to a string.
","
CALL UTF8TOSTRING(STRINGTOUTF8('This is a test'))
"

"Functions (String)","XMLATTR","
XMLATTR(nameString, valueString)
","
Creates an XML attribute element of the form ""name=value"".
The value is encoded as XML text.
This method returns a string.
","
CALL XMLNODE('a', XMLATTR('href', 'http://h2database.com'))
"

"Functions (String)","XMLNODE","
XMLNODE(elementString [, attributesString [, contentString [, indentBoolean]]])
","
Create an XML node element.
An empty or null attribute string means no attributes are set.
An empty or null content string means the node is empty.
The content is indented by default if it contains a newline.
This method returns a string.
","
CALL XMLNODE('a', XMLATTR('href', 'http://h2database.com'), 'H2')
"

"Functions (String)","XMLCOMMENT","
XMLCOMMENT(commentString)
","
Creates an XML comment.
Two dashes (""--"") are converted to ""- -"".
This method returns a string.
","
CALL XMLCOMMENT('Test')
"

"Functions (String)","XMLCDATA","
XMLCDATA(valueString)
","
Creates an XML CDATA element.
If the value contains ""]]>"", an XML text element is created instead.
This method returns a string.
","
CALL XMLCDATA('data')
"

"Functions (String)","XMLSTARTDOC","
XMLSTARTDOC()
","
Returns the XML declaration.
The result is always ""<?xml version=""1.0""?>"".
","
CALL XMLSTARTDOC()
"

"Functions (String)","XMLTEXT","
XMLTEXT(valueString [, escapeNewlineBoolean])
","
Creates an XML text element.
If enabled, newline and linefeed is converted to an XML entity (&#).
This method returns a string.
","
CALL XMLTEXT('test')
"

"Functions (String)","TO_CHAR","
TO_CHAR(value [, formatString[, nlsParamString]])
","
Oracle-compatible TO_CHAR function that can format a timestamp, a number, or text.
","
CALL TO_CHAR(TIMESTAMP '2010-01-01 00:00:00', 'DD MON, YYYY')
"

"Functions (String)","TRANSLATE","
TRANSLATE(value, searchString, replacementString)
","
Oracle-compatible TRANSLATE function that replaces a sequence of characters in a string with another set of characters.
","
CALL TRANSLATE('Hello world', 'eo', 'EO')
"

"Functions (Time and Date)","CURRENT_DATE","
{ CURRENT_DATE [ () ] | CURDATE() | SYSDATE | TODAY }
","
Returns the current date.
This method always returns the same value within a transaction.
","
CURRENT_DATE()
"

"Functions (Time and Date)","CURRENT_TIME","
{ CURRENT_TIME [ ( [ int ] ) ] | LOCALTIME [ ( [ int ] ) ] | CURTIME() }
","
Returns the current time.
If fractional seconds precision is specified it should be from 0 to 9, 0 is default.
The specified value can be used only to limit precision of a result.
The actual maximum available precision depends on operating system and JVM and can be 3 (milliseconds) or higher.
Higher precision is not available before Java 9.
These methods always return the same value within a transaction.
","
CURRENT_TIME()
"

"Functions (Time and Date)","CURRENT_TIMESTAMP","
CURRENT_TIMESTAMP [ ( [ int ] ) ]
","
Returns the current timestamp with time zone.
Time zone offset is set to a current time zone offset
If fractional seconds precision is specified it should be from 0 to 9, 6 is default.
The specified value can be used only to limit precision of a result.
The actual maximum available precision depends on operating system and JVM and can be 3 (milliseconds) or higher.
Higher precision is not available before Java 9.
This method always returns the same value within a transaction.
","
CURRENT_TIMESTAMP()
"

"Functions (Time and Date)","LOCALTIMESTAMP","
{ LOCALTIMESTAMP [ ( [ int ] ) ] | NOW( [ int ] ) }
","
Returns the current timestamp.
If fractional seconds precision is specified it should be from 0 to 9, 6 is default.
The specified value can be used only to limit precision of a result.
The actual maximum available precision depends on operating system and JVM and can be 3 (milliseconds) or higher.
Higher precision is not available before Java 9.
These methods always return the same value within a transaction.
","
LOCALTIMESTAMP()
"

"Functions (Time and Date)","DATEADD","
{ DATEADD| TIMESTAMPADD } (datetimeField, addIntLong, dateAndTime)
","
Adds units to a date-time value. The datetimeField indicates the unit.
Use negative values to subtract units.
addIntLong may be a long value when manipulating milliseconds,
microseconds, or nanoseconds otherwise its range is restricted to int.
This method returns a value with the same type as specified value if unit is compatible with this value.
If specified field is a HOUR, MINUTE, SECOND, MILLISECOND, etc and value is a DATE value DATEADD returns combined TIMESTAMP.
Fields DAY, MONTH, YEAR, WEEK, etc are not allowed for TIME values.
Fields TIMEZONE_HOUR and TIMEZONE_MINUTE are only allowed for TIMESTAMP WITH TIME ZONE values.
","
DATEADD('MONTH', 1, DATE '2001-01-31')
"

"Functions (Time and Date)","DATEDIFF","
{ DATEDIFF | TIMESTAMPDIFF } (datetimeField, aDateAndTime, bDateAndTime)
","
Returns the the number of crossed unit boundaries between two date/time values.
This method returns a long.
The datetimeField indicates the unit.
Only TIMEZONE_HOUR and TIMEZONE_MINUTE fields use the time zone offset component.
With all other fields if date/time values have time zone offset component it is ignored.
","
DATEDIFF('YEAR', T1.CREATED, T2.CREATED)
"

"Functions (Time and Date)","DAYNAME","
DAYNAME(dateAndTime)
","
Returns the name of the day (in English).
","
DAYNAME(CREATED)
"

"Functions (Time and Date)","DAY_OF_MONTH","
DAY_OF_MONTH(dateAndTime)
","
Returns the day of the month (1-31).
","
DAY_OF_MONTH(CREATED)
"

"Functions (Time and Date)","DAY_OF_WEEK","
DAY_OF_WEEK(dateAndTime)
","
Returns the day of the week (1 means Sunday).
","
DAY_OF_WEEK(CREATED)
"

"Functions (Time and Date)","ISO_DAY_OF_WEEK","
ISO_DAY_OF_WEEK(dateAndTime)
","
Returns the ISO day of the week (1 means Monday).
","
ISO_DAY_OF_WEEK(CREATED)
"

"Functions (Time and Date)","DAY_OF_YEAR","
DAY_OF_YEAR(dateAndTime)
","
Returns the day of the year (1-366).
","
DAY_OF_YEAR(CREATED)
"

"Functions (Time and Date)","EXTRACT","
EXTRACT ( datetimeField FROM { dateAndTime | interval })
","
Returns a value of the specific time unit from a date/time value.
This method returns a numeric value with EPOCH field and
an int for all other fields.
","
EXTRACT(SECOND FROM CURRENT_TIMESTAMP)
"

"Functions (Time and Date)","FORMATDATETIME","
FORMATDATETIME ( dateAndTime, formatString
[ , localeString [ , timeZoneString ] ] )
","
Formats a date, time or timestamp as a string.
The most important format characters are:
y year, M month, d day, H hour, m minute, s second.
For details of the format, see ""java.text.SimpleDateFormat"".
timeZoneString may be specified if dateAndTime is a DATE, TIME or TIMESTAMP.
timeZoneString is ignored if dateAndTime is TIMESTAMP WITH TIME ZONE.
This method returns a string.
","
CALL FORMATDATETIME(TIMESTAMP '2001-02-03 04:05:06',
    'EEE, d MMM yyyy HH:mm:ss z', 'en', 'GMT')
"

"Functions (Time and Date)","HOUR","
HOUR(dateAndTime)
","
Returns the hour (0-23) from a date/time value.
","
HOUR(CREATED)
"

"Functions (Time and Date)","MINUTE","
MINUTE(dateAndTime)
","
Returns the minute (0-59) from a date/time value.
","
MINUTE(CREATED)
"

"Functions (Time and Date)","MONTH","
MONTH(dateAndTime)
","
Returns the month (1-12) from a date/time value.
","
MONTH(CREATED)
"

"Functions (Time and Date)","MONTHNAME","
MONTHNAME(dateAndTime)
","
Returns the name of the month (in English).
","
MONTHNAME(CREATED)
"

"Functions (Time and Date)","PARSEDATETIME","
PARSEDATETIME(string, formatString
[, localeString [, timeZoneString]])
","
Parses a string and returns a timestamp.
The most important format characters are:
y year, M month, d day, H hour, m minute, s second.
For details of the format, see ""java.text.SimpleDateFormat"".
","
CALL PARSEDATETIME('Sat, 3 Feb 2001 03:05:06 GMT',
    'EEE, d MMM yyyy HH:mm:ss z', 'en', 'GMT')
"

"Functions (Time and Date)","QUARTER","
QUARTER(dateAndTime)
","
Returns the quarter (1-4) from a date/time value.
","
QUARTER(CREATED)
"

"Functions (Time and Date)","SECOND","
SECOND(dateAndTime)
","
Returns the second (0-59) from a date/time value.
","
SECOND(CREATED)
"

"Functions (Time and Date)","WEEK","
WEEK(dateAndTime)
","
Returns the week (1-53) from a date/time value.
This method uses the current system locale.
","
WEEK(CREATED)
"

"Functions (Time and Date)","ISO_WEEK","
ISO_WEEK(dateAndTime)
","
Returns the ISO week (1-53) from a date/time value.
This function uses the ISO definition when
first week of year should have at least four days
and week is started with Monday.
","
ISO_WEEK(CREATED)
"

"Functions (Time and Date)","YEAR","
YEAR(dateAndTime)
","
Returns the year from a date/time value.
","
YEAR(CREATED)
"

"Functions (Time and Date)","ISO_YEAR","
ISO_YEAR(dateAndTime)
","
Returns the ISO week year from a date/time value.
","
ISO_YEAR(CREATED)
"

"Functions (System)","ARRAY_GET","
ARRAY_GET(arrayExpression, indexExpression)
","
Returns one element of an array.
Returns NULL if there is no such element or array is NULL.
","
CALL ARRAY_GET(('Hello', 'World'), 2)
"

"Functions (System)","ARRAY_LENGTH","
ARRAY_LENGTH(arrayExpression)
","
Returns the length of an array.
Returns NULL if the specified array is NULL.
","
CALL ARRAY_LENGTH(('Hello', 'World'))
"

"Functions (System)","ARRAY_CONTAINS","
ARRAY_CONTAINS(arrayExpression, value)
","
Returns a boolean TRUE if the array contains the value or FALSE if it does not contain it.
Returns NULL if the specified array is NULL.
","
CALL ARRAY_CONTAINS(('Hello', 'World'), 'Hello')
"

"Functions (System)","AUTOCOMMIT","
AUTOCOMMIT()
","
Returns true if auto commit is switched on for this session.
","
AUTOCOMMIT()
"

"Functions (System)","CANCEL_SESSION","
CANCEL_SESSION(sessionInt)
","
Cancels the currently executing statement of another session.
The method only works if the multithreaded kernel is enabled (see SET MULTI_THREADED).
Returns true if the statement was canceled, false if the session is closed or no statement is currently executing.

Admin rights are required to execute this command.
","
CANCEL_SESSION(3)
"

"Functions (System)","CASEWHEN Function","
CASEWHEN(boolean, aValue, bValue)
","
Returns 'a' if the boolean expression is true, otherwise 'b'.
Returns the same data type as the parameter.
","
CASEWHEN(ID=1, 'A', 'B')
"

"Functions (System)","CAST","
CAST(value AS dataType)
","
Converts a value to another data type. The following conversion rules are used:
When converting a number to a boolean, 0 is false and every other value is true.
When converting a boolean to a number, false is 0 and true is 1.
When converting a number to a number of another type, the value is checked for overflow.
When converting a number to binary, the number of bytes matches the precision.
When converting a string to binary, it is hex encoded (every byte two characters);
a hex string can be converted to a number by first converting it to binary.
If a direct conversion is not possible, the value is first converted to a string.
","
CAST(NAME AS INT);
CAST(65535 AS BINARY);
CAST(CAST('FFFF' AS BINARY) AS INT);
"

"Functions (System)","COALESCE","
{ COALESCE | NVL } (aValue, bValue [,...])
","
Returns the first value that is not null.
","
COALESCE(A, B, C)
"

"Functions (System)","CONVERT","
CONVERT(value, dataType)
","
Converts a value to another data type.
","
CONVERT(NAME, INT)
"

"Functions (System)","CURRVAL","
CURRVAL( [ schemaName, ] sequenceString )
","
Returns the current (last) value of the sequence, independent of the session.
If the sequence was just created, the method returns (start - interval).
If the schema name is not set, the current schema is used.
If the schema name is not set, the sequence name is converted to uppercase (for compatibility).
This method returns a long.
","
CURRVAL('TEST_SEQ')
"

"Functions (System)","CSVREAD","
CSVREAD(fileNameString [, columnsString [, csvOptions ] ] )
","
Returns the result set of reading the CSV (comma separated values) file.
For each parameter, NULL means the default value should be used.

If the column names are specified (a list of column names separated with the
fieldSeparator), those are used, otherwise (or if they are set to NULL) the first line of
the file is interpreted as the column names.
In that case, column names that contain no special characters (only letters, '_',
and digits; similar to the rule for Java identifiers) are considered case insensitive.
Other column names are case sensitive, that means you need to use quoted identifiers
(see below).

The default charset is the default value for this system, and the default field separator
is a comma. Missing unquoted values as well as data that matches nullString is
parsed as NULL. All columns of type VARCHAR.

The BOM (the byte-order-mark) character 0xfeff at the beginning of the file is ignored.

This function can be used like a table: ""SELECT * FROM CSVREAD(...)"".

Instead of a file, an URL may be used, for example
""jar:file:///c:/temp/example.zip!/org/example/nested.csv"".
To read a stream from the classpath, use the prefix ""classpath:"".
To read from HTTP, use the prefix ""http:"" (as in a browser).

For performance reason, CSVREAD should not be used inside a join.
Instead, import the data first (possibly into a temporary table) and then use the table.

Admin rights are required to execute this command.
","
CALL CSVREAD('test.csv');
-- Read a file containing the columns ID, NAME with
CALL CSVREAD('test2.csv', 'ID|NAME', 'charset=UTF-8 fieldSeparator=|');
SELECT * FROM CSVREAD('data/test.csv', null, 'rowSeparator=;');
-- Read a tab-separated file
SELECT * FROM CSVREAD('data/test.tsv', null, 'rowSeparator=' || CHAR(9));
SELECT ""Last Name"" FROM CSVREAD('address.csv');
SELECT ""Last Name"" FROM CSVREAD('classpath:/org/acme/data/address.csv');
"

"Functions (System)","CSVWRITE","
CSVWRITE ( fileNameString, queryString [, csvOptions [, lineSepString] ] )
","
Writes a CSV (comma separated values). The file is overwritten if it exists.
If only a file name is specified, it will be written to the current working directory.
For each parameter, NULL means the default value should be used.
The default charset is the default value for this system, and the default field separator is a comma.

The values are converted to text using the default string representation;
if another conversion is required you need to change the select statement accordingly.
The parameter nullString is used when writing NULL (by default nothing is written
when NULL appears). The default line separator is the default value for this
system (system property ""line.separator"").

The returned value is the number or rows written.
Admin rights are required to execute this command.
","
CALL CSVWRITE('data/test.csv', 'SELECT * FROM TEST');
CALL CSVWRITE('data/test2.csv', 'SELECT * FROM TEST', 'charset=UTF-8 fieldSeparator=|');
-- Write a tab-separated file
CALL CSVWRITE('data/test.tsv', 'SELECT * FROM TEST', 'charset=UTF-8 fieldSeparator=' || CHAR(9));
"

"Functions (System)","DATABASE","
DATABASE()
","
Returns the name of the database.
","
CALL DATABASE();
"

"Functions (System)","DATABASE_PATH","
DATABASE_PATH()
","
Returns the directory of the database files and the database name, if it is file based.
Returns NULL otherwise.
","
CALL DATABASE_PATH();
"

"Functions (System)","DECODE","
DECODE(value, whenValue, thenValue [,...])
","
Returns the first matching value. NULL is considered to match NULL.
If no match was found, then NULL or the last parameter (if the parameter count is even) is returned.
This function is provided for Oracle compatibility (see there for details).
","
CALL DECODE(RAND()>0.5, 0, 'Red', 1, 'Black');
"

"Functions (System)","DISK_SPACE_USED","
DISK_SPACE_USED(tableNameString)
","
Returns the approximate amount of space used by the table specified.
Does not currently take into account indexes or LOB's.
This function may be expensive since it has to load every page in the table.
","
CALL DISK_SPACE_USED('my_table');
"

"Functions (System)","SIGNAL","
SIGNAL(sqlStateString, messageString)
","
Throw an SQLException with the passed SQLState and reason.
","
CALL SIGNAL('23505', 'Duplicate user ID: ' || user_id);
"

"Functions (System)","ESTIMATED_ENVELOPE","
ESTIMATED_ENVELOPE(tableNameString, columnNameString)
","
Returns the estimated minimum bounding box that encloses all specified GEOMETRY values.
Only 2D coordinate plane is supported.
NULL values are ignored.
This function is only supported by MVStore engine.
Column must have a spatial index.
This function is fast, but estimation may include uncommitted data (including data from other transactions),
may return approximate bounds, or be different with actual value due to other reasons.
Use with caution.
If estimation is not available this function returns NULL.
For accurate and reliable result use ESTIMATE aggregate function instead.
","
CALL ESTIMATED_ENVELOPE('MY_TABLE', 'GEOMETRY_COLUMN');
"

"Functions (System)","FILE_READ","
FILE_READ(fileNameString [,encodingString])
","
Returns the contents of a file. If only one parameter is supplied, the data are
returned as a BLOB. If two parameters are used, the data is returned as a CLOB
(text). The second parameter is the character set to use, NULL meaning the
default character set for this system.

File names and URLs are supported.
To read a stream from the classpath, use the prefix ""classpath:"".

Admin rights are required to execute this command.
","
SELECT LENGTH(FILE_READ('~/.h2.server.properties')) LEN;
SELECT FILE_READ('http://localhost:8182/stylesheet.css', NULL) CSS;
"

"Functions (System)","FILE_WRITE","
FILE_WRITE(blobValue, fileNameString)
","
Write the supplied parameter into a file. Return the number of bytes written.

Write access to folder, and admin rights are required to execute this command.
","
SELECT FILE_WRITE('Hello world', '/tmp/hello.txt')) LEN;
"

"Functions (System)","GREATEST","
GREATEST(aValue, bValue [,...])
","
Returns the largest value that is not NULL, or NULL if all values are NULL.
","
CALL GREATEST(1, 2, 3);
"

"Functions (System)","IDENTITY","
IDENTITY()
","
Returns the last inserted identity value for this session.
This value changes whenever a new sequence number was generated,
even within a trigger or Java function. See also SCOPE_IDENTITY.
This method returns a long.
","
CALL IDENTITY();
"

"Functions (System)","IFNULL","
IFNULL(aValue, bValue)
","
Returns the value of 'a' if it is not null, otherwise 'b'.
","
CALL IFNULL(NULL, '');
"

"Functions (System)","LEAST","
LEAST(aValue, bValue [,...])
","
Returns the smallest value that is not NULL, or NULL if all values are NULL.
","
CALL LEAST(1, 2, 3);
"

"Functions (System)","LOCK_MODE","
LOCK_MODE()
","
Returns the current lock mode. See SET LOCK_MODE.
This method returns an int.
","
CALL LOCK_MODE();
"

"Functions (System)","LOCK_TIMEOUT","
LOCK_TIMEOUT()
","
Returns the lock timeout of the current session (in milliseconds).
","
LOCK_TIMEOUT()
"

"Functions (System)","LINK_SCHEMA","
LINK_SCHEMA(targetSchemaString, driverString, urlString,
userString, passwordString, sourceSchemaString)
","
Creates table links for all tables in a schema.
If tables with the same name already exist, they are dropped first.
The target schema is created automatically if it does not yet exist.
The driver name may be empty if the driver is already loaded.
The list of tables linked is returned in the form of a result set.
Admin rights are required to execute this command.
","
CALL LINK_SCHEMA('TEST2', '', 'jdbc:h2:test2', 'sa', 'sa', 'PUBLIC');
"

"Functions (System)","MEMORY_FREE","
MEMORY_FREE()
","
Returns the free memory in KB (where 1024 bytes is a KB).
This method returns an int.
The garbage is run before returning the value.
Admin rights are required to execute this command.
","
MEMORY_FREE()
"

"Functions (System)","MEMORY_USED","
MEMORY_USED()
","
Returns the used memory in KB (where 1024 bytes is a KB).
This method returns an int.
The garbage is run before returning the value.
Admin rights are required to execute this command.
","
MEMORY_USED()
"

"Functions (System)","NEXTVAL","
NEXTVAL ( [ schemaName, ] sequenceString )
","
Returns the next value of the sequence.
Used values are never re-used, even when the transaction is rolled back.
If the schema name is not set, the current schema is used, and the sequence name is converted to uppercase (for compatibility).
This method returns a long.
","
NEXTVAL('TEST_SEQ')
"

"Functions (System)","NULLIF","
NULLIF(aValue, bValue)
","
Returns NULL if 'a' is equals to 'b', otherwise 'a'.
","
NULLIF(A, B)
"

"Functions (System)","NVL2","
NVL2(testValue, aValue, bValue)
","
If the test value is null, then 'b' is returned. Otherwise, 'a' is returned.
The data type of the returned value is the data type of 'a' if this is a text type.
","
NVL2(X, 'not null', 'null')
"

"Functions (System)","READONLY","
READONLY()
","
Returns true if the database is read-only.
","
READONLY()
"

"Functions (System)","ROWNUM","
ROWNUM()
","
Returns the number of the current row.
This method returns an integer value.
It is supported for SELECT statements, as well as for DELETE and UPDATE.
The first row has the row number 1, and is calculated before ordering and grouping the result set,
but after evaluating index conditions (even when the index conditions are specified in an outer query).
Use the ROW_NUMBER() OVER () function to get row numbers after grouping or in specified order.
","
SELECT ROWNUM(), * FROM TEST;
SELECT ROWNUM(), * FROM (SELECT * FROM TEST ORDER BY NAME);
SELECT ID FROM (SELECT T.*, ROWNUM AS R FROM TEST T) WHERE R BETWEEN 2 AND 3;
"

"Functions (System)","SCHEMA","
SCHEMA()
","
Returns the name of the default schema for this session.
","
CALL SCHEMA()
"

"Functions (System)","SCOPE_IDENTITY","
SCOPE_IDENTITY()
","
Returns the last inserted identity value for this session for the current scope
(the current statement).
Changes within triggers and Java functions are ignored. See also IDENTITY().
This method returns a long.
","
CALL SCOPE_IDENTITY();
"

"Functions (System)","SESSION_ID","
SESSION_ID()
","
Returns the unique session id number for the current database connection.
This id stays the same while the connection is open.
This method returns an int.
The database engine may re-use a session id after the connection is closed.
","
CALL SESSION_ID()
"

"Functions (System)","SET","
SET(@variableName, value)
","
Updates a variable with the given value.
The new value is returned.
When used in a query, the value is updated in the order the rows are read.
When used in a subquery, not all rows might be read depending on the query plan.
This can be used to implement running totals / cumulative sums.
","
SELECT X, SET(@I, IFNULL(@I, 0)+X) RUNNING_TOTAL FROM SYSTEM_RANGE(1, 10)
"

"Functions (System)","TABLE","
{ TABLE | TABLE_DISTINCT } ( { name dataType = expression } [,...] )
","
Returns the result set. TABLE_DISTINCT removes duplicate rows.
","
SELECT * FROM TABLE(ID INT=(1, 2), NAME VARCHAR=('Hello', 'World'))
"

"Functions (System)","TRANSACTION_ID","
TRANSACTION_ID()
","
Returns the current transaction id for this session.
This method returns NULL if there is no uncommitted change, or if the the database is not persisted.
Otherwise a value of the following form is returned:
""logFileId-position-sessionId"".
This method returns a string.
The value is unique across database restarts (values are not re-used).
","
CALL TRANSACTION_ID()
"

"Functions (System)","TRUNCATE_VALUE","
TRUNCATE_VALUE(value, precisionInt, forceBoolean)
","
Truncate a value to the required precision.
The precision of the returned value may be a bit larger than requested,
because fixed precision values are not truncated (unlike the numeric TRUNCATE method).
Unlike CAST, the truncating a decimal value may lose precision if the force flag is set to true.
The method returns a value with the same data type as the first parameter.
","
CALL TRUNCATE_VALUE(X, 10, TRUE);
"

"Functions (System)","USER","
{ USER | CURRENT_USER } ()
","
Returns the name of the current user of this session.
","
CURRENT_USER()
"

"Functions (System)","H2VERSION","
H2VERSION()
","
Returns the H2 version as a String.
","
H2VERSION()
"

"Functions (Window)","ROW_NUMBER","
ROW_NUMBER() OVER windowSpecification
","
Returns the number of the current row starting with 1.

Window functions are currently experimental in H2 and should be used with caution.
They also may require a lot of memory for large queries.
","
SELECT ROW_NUMBER() OVER (), * FROM TEST;
SELECT ROW_NUMBER() OVER (ORDER BY ID), * FROM TEST;
SELECT ROW_NUMBER() OVER (PARTITION BY CATEGORY ORDER BY ID), * FROM TEST;
"

"Functions (Window)","RANK","
RANK() OVER windowSpecification
","
Returns the rank of the current row.
The rank of a row is the number of rows that precede this row plus 1.
If two or more rows have the same values in ORDER BY columns, these rows get the same rank from the first row with the same values.
It means that gaps in ranks are possible.

Window functions are currently experimental in H2 and should be used with caution.
They also may require a lot of memory for large queries.
","
SELECT RANK() OVER (ORDER BY ID), * FROM TEST;
SELECT RANK() OVER (PARTITION BY CATEGORY ORDER BY ID), * FROM TEST;
"

"Functions (Window)","DENSE_RANK","
DENSE_RANK() OVER windowSpecification
","
Returns the dense rank of the current row.
The rank of a row is the number of groups of rows with the same values in ORDER BY columns that precede group with this row plus 1.
If two or more rows have the same values in ORDER BY columns, these rows get the same rank.
Gaps in ranks are not possible.

Window functions are currently experimental in H2 and should be used with caution.
They also may require a lot of memory for large queries.
","
SELECT DENSE_RANK() OVER (ORDER BY ID), * FROM TEST;
SELECT DENSE_RANK() OVER (PARTITION BY CATEGORY ORDER BY ID), * FROM TEST;
"

"Functions (Window)","PERCENT_RANK","
PERCENT_RANK() OVER windowSpecification
","
Returns the relative rank of the current row.
The relative rank is calculated as (RANK - 1) / (NR - 1),
where RANK is a rank of the row and NR is a number of rows in window partition with this row.

Window functions are currently experimental in H2 and should be used with caution.
They also may require a lot of memory for large queries.
","
SELECT PERCENT_RANK() OVER (ORDER BY ID), * FROM TEST;
SELECT PERCENT_RANK() OVER (PARTITION BY CATEGORY ORDER BY ID), * FROM TEST;
"

"Functions (Window)","CUME_DIST","
CUME_DIST() OVER windowSpecification
","
Returns the relative rank of the current row.
The relative rank is calculated as NP / NR
where NP is a number of rows that precede the current row or have the same values in ORDER BY columns
and NR is a number of rows in window partition with this row.

Window functions are currently experimental in H2 and should be used with caution.
They also may require a lot of memory for large queries.
","
SELECT CUME_DIST() OVER (ORDER BY ID), * FROM TEST;
SELECT CUME_DIST() OVER (PARTITION BY CATEGORY ORDER BY ID), * FROM TEST;
"

"System Tables","Information Schema","
INFORMATION_SCHEMA
","
To get the list of system tables, execute the statement SELECT * FROM
INFORMATION_SCHEMA.TABLES WHERE TABLE_SCHEMA = 'INFORMATION_SCHEMA'
","

"
"System Tables","Range Table","
SYSTEM_RANGE(start, end)
","
Contains all values from start to end (this is a dynamic table).
","
SYSTEM_RANGE(0, 100)
"